Suzuki Alto 2009-2015 Nissan Pixo 2009-2013 Accelerator Pedal 49400-68K40
Suzuki Alto 2009-2015 Nissan Pixo 2009-2013 Accelerator Pedal 49400-68K40
THEPARTPILOT
Suzuki Alto 2009-2015 / Nissan Pixo 2009-2013 Accelerator Pedal
Primary part number: 49400-68K40 | HELLA reference: 6PV 009 074-08 | Electronic throttle pedal assembly
Before ordering, compare your old unit's number, 6-pin connector, mounting bracket, fixing holes, pedal shape and sensor housing with every photograph below. Vehicle year alone is not sufficient. When uncertain, send clear photographs of your old part and its label through eBay Messages before purchase.
Actual Item Photographs
Correct 5-Door Vehicle References
Vehicle reference photo credits: Suzuki Alto - Xavigivax, CC BY-SA 3.0; Nissan Pixo - Vauxford, CC BY-SA 4.0. Images are shown only to identify the relevant 5-door model family.
Item Details and Identification
| Detail | Verified information |
|---|---|
| Part | Electronic accelerator / throttle pedal assembly with integrated pedal-position sensor |
| Manufacturer marking | SUZUKI marking visible on the photographed sensor label; HELLA reference visible on the same label |
| Manufacturer Part Number | 49400-68K40 |
| Interchange Part Number | 4940068K40; 49400M68K40; HELLA 6PV 009 074-08; 6PV00907408 |
| Superseded Part Number | No confirmed superseded number verified - do not substitute a similar-looking number |
| Connector | 6-pin electronic connector - compare keying, lock and pin layout with your old unit |
| Visible construction | Pressed-steel mounting bracket, moulded black engineering-plastic pedal arm and pad, integrated electronic sensor housing |
| Colour / finish / marking | Black pedal and sensor housing; silver metal bracket; white salvage/reference writing is visible in the actual photographs |
| Placement | Driver footwell, mounted to the pedal/bulkhead bracket to the right of the brake pedal on UK right-hand-drive vehicles |
| Condition | Pre-owned component. Expect age-related cosmetic marks. You receive the item shown in the actual photographs. |
| Included | Accelerator pedal assembly as pictured. No extra trim, loom, fixing bolts or diagnostic coding service unless visibly shown. |
| Warranty | 30-day seller warranty, subject to the listing terms and correct diagnosis/fitment |
| VAT | Sold under the VAT margin/global accounting scheme where applicable. VAT is not shown separately and is not reclaimable as a separate input-tax amount. |
Confirmed Vehicle Compatibility
| Make and model | Exact years | Body / chassis | Engine | Fitment decision |
|---|---|---|---|---|
| Suzuki Alto | 2009-2015 | European 5-door hatchback; GF / HA25 / AMF310 / GFC31S model family | 1.0 petrol, K10B, 996 cc, 3-cylinder, approximately 50 kW / 68 PS |
CONFIRMED MODEL APPLICATION Final approval requires 49400-68K40 / 6PV 009 074-08 plus matching connector and bracket. |
| Nissan Pixo | 2009-2013 | UA0, 5-door hatchback | 1.0 petrol, K10B, 996 cc, 3-cylinder, approximately 50 kW / 68 PS |
CONFIRMED MODEL APPLICATION Final approval requires 49400-68K40 / 6PV 009 074-08 plus matching connector and bracket. |
Vehicles and Variants This Listing Does Not Confirm
| Vehicle / variation | Status | Reason |
|---|---|---|
| Any 3-door vehicle | NOT LISTED | The verified Alto and Pixo model applications shown here are 5-door body styles. |
| Suzuki Swift, Splash or Celerio | DO NOT ASSUME FITMENT | Similar models commonly use different pedal numbers, brackets or electrical connectors. |
| Other Suzuki Alto generations, regional bodies or post-2015 models | NOT CONFIRMED | The Alto name covers several unrelated body/chassis families. |
| Any unit carrying a different part number | DOES NOT MATCH THIS LISTING | A visually similar pedal can have different signal calibration, connector keying or mounting geometry. |
| Different engine code, connector, fixing-hole pattern or sensor casing | DO NOT ORDER | All identification points must agree with the photographed part. |
| Automatic variant without an exact label/photo match | VERIFY FIRST | No blanket automatic fitment promise is made from vehicle year alone. |
Where It Fits and What It Controls
Installation position
The assembly mounts high in the driver's footwell and forms the accelerator pedal itself. The electrical connector sits at the upper sensor housing and the steel bracket secures the unit to the vehicle structure.
Operating function
This drive-by-wire pedal measures pedal position and sends an electrical signal to the engine control unit. The control unit then manages electronic throttle opening and fuel/engine response. There is no conventional throttle cable on this assembly.
Possible Symptoms of a Faulty Pedal Sensor
Throttle response
- Delayed, hesitant or absent accelerator response
- Intermittent acceleration or a repeatable dead spot
- Unexpectedly limited engine power
Warning and diagnostic signs
- Engine-management warning lamp
- Reduced-power or limp-home mode
- Accelerator pedal position sensor or signal-correlation fault codes
Diagnose before replacement
- Inspect plug security, wiring and terminal condition
- Check battery voltage, throttle body and related engine-control faults
- Use live diagnostic data to compare pedal signal tracks
Why Exact Factory-Specification Matching Matters
Correct physical fit
Matching bracket angles, hole positions, pedal travel, connector keying and locking features helps avoid modification and unsafe installation.
Correct electronic signal
Accelerator pedals use redundant electronic signal tracks. The correct reference helps preserve the response range expected by the vehicle control system.
Lower-cost recycling
A correctly matched recycled factory part can offer substantial savings compared with a new dealer-supplied unit. Actual savings vary by current new-part price and availability.
Fitting Guide, Required Tools and Repair Time
Suggested tools
Inspection lightTrim toolMetric socketsRatchetShort extensionTorque wrenchDiagnostic scan tool
Planning time
Approx. 0.5 to 1.0 labour hour for a competent technician, subject to trim access, seized fixings, electrical diagnosis and any reset/relearn procedure. This is a planning estimate, not a manufacturer flat-rate promise.
Static Garage Labour Cost Calculator
No active content is used. Select your garage's hourly rate below and compare it with the estimated 0.5-1.0 hour labour range.
| Garage hourly rate | 0.5 hour estimate | 1.0 hour estimate |
|---|---|---|
| £50 per hour | £25 | £50 |
| £60 per hour | £30 | £60 |
| £70 per hour | £35 | £70 |
| £80 per hour | £40 | £80 |
| £90 per hour | £45 | £90 |
| £100 per hour | £50 | £100 |
| £120 per hour | £60 | £120 |
| £150 per hour | £75 | £150 |
Illustrative labour only. Parts, diagnostics, VAT charged by the repairer, call-out fees, additional trim removal, wiring repair, seized fasteners and further faults are excluded. ThePartPilot fitting service is subject to workshop availability and prior arrangement through eBay Messages.
Ordering Checklist - Reduce Wrong Orders
1. Label
Your old unit should show 49400-68K40 or the matching HELLA reference 6PV 009 074-08.
2. Connector
Confirm the same 6-pin plug, keyway, latch position and sensor-housing orientation.
3. Bracket
Match every fixing hole, bracket bend, mounting tab and pedal profile to the actual photographs.
4. Vehicle
Confirm 5-door Suzuki Alto 2009-2015 or Nissan Pixo UA0 2009-2013 with the 1.0 K10B engine.
Delivery, Address, Returns and International Orders
Secure dispatch
The item will be checked against the listing reference, protected and boxed for dispatch. Postage service and cost are those shown by eBay at checkout; this description does not promise free postage.
International delivery
Eligible international destinations are offered through eBay's Global Shipping Programme. Availability, import charges, duties, service level and destination eligibility are calculated by eBay and shown at checkout.
Checkout address
Check the delivery address before completing payment. We can dispatch only to the address shown in the eBay order details and cannot manually change it after purchase.
Support a Local Parts Business and Recycle Responsibly
Local specialist support
Buying from ThePartPilot supports a local automotive-parts business focused on detailed identification, careful packing and practical fitment guidance.
Keep serviceable parts in use
Reusing a correctly tested vehicle component can reduce demand for new raw materials, avoid unnecessary waste and extend the useful life of an existing part.
Stock and dispatch
With more than 25,000 parts typically held on the shelf, our aim is to identify, protect and dispatch the correct component efficiently.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.