Toyota Auris MK1 E150 2007-2012 RH Driver Centre Console Trim Panel 55413-02050
Do not rely on engine size, registration year or the eBay compatibility tool alone. Interior trim can vary by production date, body style, market, steering configuration, specification and colour package. The safest match is always PART NUMBER + SIDE + SHAPE + CLIPS + FINISH.
| Vehicle Manufacturer | Toyota |
| Vehicle | Auris Mk1 / first generation E15 / E150 family |
| UK Search / Fitment Years | 2007–2012 |
| Component | Centre-console / lower-dashboard side finishing trim panel |
| Placement | Front Right / RH |
| UK RHD Description | Driver-side trim on normal UK right-hand-drive Auris models |
| Manufacturer Part Number | 55413-02050 |
| Compact Number Format | 5541302050 |
| Material | ABS plastic — >ABS< marking is visible on the photographed component |
| Colour / Finish | Two-tone light/silver-grey and dark-grey appearance — match the actual photographs before ordering |
| Condition | Pre-owned recycled vehicle component. Expect normal cosmetic marks, scratches or storage/removal wear consistent with the actual photographs. |
| Included | One trim panel as photographed. No surrounding dashboard, console, switches or unrelated fixings are included unless clearly shown. |
| Interchange Part Number | No separate direct interchange number independently confirmed |
| Superseded Part Number | No confirmed superseded number verified |
| eBay Item Number | 147476687681 |
This panel finishes the physical RIGHT-hand side of the raised centre-console / lower-dashboard area beside the front footwell. On a normal UK right-hand-drive Auris, this is the driver side. On a left-hand-drive vehicle, the same physical RIGHT side is not the driver side.
This is a passive interior finishing/protection panel. It does not itself operate an electrical, electronic, heating, steering or mechanical system. Its purpose is to finish and protect the console area, conceal the underlying structure/fixings and maintain the correct factory-style interior appearance.
| Vehicle | Years | Status | What You Must Check |
|---|---|---|---|
| Toyota Auris Mk1 E15/E150 5-door hatch | 2007–2012 UK | CONFIRMED MODEL FAMILY | Exact 55413-02050 + RIGHT side + shape + clips + finish must match. |
| Toyota Auris Mk1 E15/E150 3-door hatch | 2007–2012 UK | VERIFY ONLY | Three-door existed in this generation, but an independent exact-number 3-door donor was not confirmed during our cross-check. Buy only if your moulded number and geometry match exactly. |
| Toyota Auris Hybrid E15 / ZWE150 5-door | 2010–2012 UK | VERIFY ONLY | First-generation Hybrid falls within the vehicle generation, but exact 55413-02050 Hybrid fitment was not independently confirmed. Match the original component. |
| Left-hand-drive Auris E15/E150 | 2007–2012 | VERIFY EXACT PART | Exact-number donor evidence exists on LHD Auris. Remember: this is the physical RIGHT-side panel, which will not be the driver side on LHD cars. |
| Toyota Auris Mk2 / E18 hatch | 2012 onward | DO NOT ORDER | Different generation/interior design. |
| Toyota Auris Touring Sports estate | 2013 onward | DO NOT ORDER | Later-generation vehicle. |
| Toyota Corolla / Yaris / Verso / Avensis | Any | NO CONFIRMED INTERCHANGE | Do not order because another Toyota panel appears visually similar. No reliable direct 55413-02050 cross-model fitment was confirmed. |
| Any car with a different moulded number, opposite side, different shape or different clip layout | Any | DO NOT ORDER | The photographed part must match your original. |
1.6 petrol hatch
55413-02050 recorded
2.0 D-4D RHD hatch
55413-02050 recorded
2.2 diesel hatch
55413-02050 recorded
2.0 diesel hatch
55413-02050 recorded
These examples confirm application across several first-generation Auris powertrains, but an engine match by itself is not sufficient to prove interior-trim compatibility.
Find 55413-02050 moulded into your original panel.
This listing is for the physical RIGHT-hand panel.
Compare every edge, opening and contour with our actual photo.
Compare fixing tabs and clip locations before ordering.
Check the two-tone grey/silver finish against your interior.
Confirm first-generation Auris E15/E150, not the later E18.
When the exact part number is matched, a manufacturer-original panel is normally the strongest route to reproducing the vehicle's intended shape, mounting points, edge profile, surface texture and fit.
Lower-cost pattern replacements can vary in moulding quality, colour, texture, clip position and edge alignment. A correctly matched recycled manufacturer-original component allows you to retain the intended vehicle design without paying for an unnecessary newly manufactured replacement.
We deliberately do not advertise a fixed percentage saving because new-part pricing varies by supplier, availability and time. The important comparison is the actual delivered price of this component against the current cost and availability of an equivalent new replacement.
- Cracked, split or broken plastic.
- Broken mounting tabs or retaining clips.
- Panel sits proud and will no longer remain flush with surrounding trim.
- Rattling or buzzing caused by loose trim.
- Heavy scratches, gouges or cosmetic damage.
- Heat, sunlight or age-related surface deterioration/discolouration.
- Panel is missing, leaving the underlying console structure exposed.
- Plastic interior trim-removal tools
- Microfibre cloth
- Low-tack masking tape to protect adjacent trim
- Torch / inspection light
- Small Phillips screwdriver or trim pick only if your vehicle has an adjacent fastener/clip requiring it
- Park safely. Apply the parking brake, switch the ignition off and remove the key.
- Protect surrounding surfaces. Use a cloth or low-tack tape around vulnerable trim edges.
- Compare before removal. Hold the replacement beside your installed panel and confirm number, side, shape, finish and clip positions.
- Inspect the existing installation. Look carefully for screws, clips, tabs or overlapping adjacent panels before applying force.
- Release progressively. Use a plastic trim tool and work one retaining point at a time. Do not pull violently.
- Check reusable retainers. Inspect clips, pads or retainers and transfer only where appropriate.
- Align the replacement. Locate tabs/clips correctly before applying even hand pressure.
- Final inspection. Confirm all edges sit flush, the panel is secure and no new rattle or interference has been introduced.
| Garage Rate | 0.3 hr Estimate | 0.5 hr Estimate |
|---|---|---|
| £50/hr | £15 | £25 |
| £60/hr | £18 | £30 |
| £70/hr | £21 | £35 |
| £80/hr | £24 | £40 |
| £90/hr | £27 | £45 |
| £100/hr | £30 | £50 |
| £120/hr | £36 | £60 |
| £150/hr | £45 | £75 |
If you would like assistance with fitting, please contact us through eBay Messages before making travel arrangements so availability can be checked.
ThePartPilot holds more than 25,000 vehicle parts in stock and on the shelf at any one time. Our fitment-first approach is designed to help buyers identify the correct component before ordering, reducing unnecessary returns, vehicle downtime and avoidable transport.
International delivery is available through the eBay Global Shipping Programme where the item, destination and buyer order are eligible. eBay controls international availability, delivery charges, import processing and checkout options.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
We dispatch to the delivery address attached to your eBay order at checkout. Please check it carefully before completing payment. We cannot simply redirect an order to a different address after checkout. If the submitted address is incorrect, the safest solution may be to request cancellation and reorder using the correct address.
VAT is not separately itemised on this sale and no separately itemised reclaimable VAT amount is shown. Where applicable, international import taxes, duties or checkout charges are determined and displayed by eBay.
This listing currently provides a 30-day return period / seller warranty. Please perform the fitment checks above before installation.
For a change-of-mind or incorrect-fitment return, please return the component complete and in the same condition in which it was supplied wherever possible.
Where eBay seller-protection rules apply, a refund deduction may be available when a returned item has suffered an actual loss in value because it has been installed, altered, damaged, excessively handled or returned incomplete. An eligible deduction can be up to the amount permitted under eBay's current rules, including up to 50% in qualifying cases.
This is not an automatic restocking fee. Any deduction must relate to the returned item's actual changed condition and the protections available for that transaction. Nothing in this description removes a buyer's applicable rights where an item is genuinely not as described.
Every order helps support an independent automotive parts business, our stock operation and the work involved in identifying, preparing and supplying serviceable vehicle components.
Reusing a serviceable vehicle component keeps an existing part in circulation, helps reduce unnecessary automotive waste and can avoid the need to manufacture another replacement component. It is a practical way to keep vehicles on the road while getting more useful life from parts that already exist.
Parts are prepared for transport with the aim of protecting vulnerable faces, corners and mounting points. Please inspect your parcel and component promptly after delivery.
RIGHT-HAND SIDE • AURIS MK1 E15/E150 • CORRECT SHAPE • CORRECT CLIPS • CORRECT FINISH
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.