Toyota Corolla E12 2002-2007 Rear Left Interior Door Handle 50594A1 5 Door

Toyota Corolla E12 2002-2007 Rear Left Interior Door Handle 50594A1 5 Door

£19.16
Skip to product information
Toyota Corolla E12 2002-2007 Rear Left Interior Door Handle 50594A1 5 Door

Toyota Corolla E12 2002-2007 Rear Left Interior Door Handle 50594A1 5 Door

£19.16
Toyota Corolla E12 Rear Left Interior Door Handle 50594A1 | ThePartPilot
THEPARTPILOT
Used Original Vehicle Parts • Tested • Stocked • Ready To Dispatch
TOYOTA COROLLA E12 • 2002–2007 • 5 DOOR
REAR LEFT / PASSENGER-SIDE INTERIOR DOOR RELEASE HANDLE
Reference 50594A1 Rear Left Interior Handle Used Original Part
THEPARTPILOT • THEPARTPILOT • THEPARTPILOT

⚠️ FITMENT FIRST — PLEASE READ BEFORE ORDERING

Correct fitment is more important than simply matching the vehicle registration.

This listing is for the rear-left interior door opening/release handle shown in the listing photographs and carrying the visible/reference marking 50594A1.

50594A1 should NOT be treated as a unique Toyota ordering number on its own. Toyota used visually similar handles across different vehicles, door positions, interior colours and specifications.

For the safest possible purchase, compare your existing handle against the listing photographs including the shape, mounting points, lever orientation, colour/finish and 50594A1 marking.

If there is any uncertainty, send us your 17-character VIN before ordering. We would rather verify the vehicle first than have you order the wrong part.

Vehicle Reference — Toyota Corolla E12 5 Door

Toyota Corolla E12 five door hatchback reference vehicle
Reference vehicle image: Toyota Corolla E12 five-door hatchback. Image is for vehicle identification/location guidance only; colour and specification may differ.
Toyota Corolla E12 rear left door interior handle location
Rear-left door reference showing the interior door trim and approximate position of the inside release handle. Reference photograph only.

Part Identification

Vehicle Make Toyota
Vehicle Family Corolla E12 / E120 generation
Part Type Interior door opening / release handle
Position Rear Left
Body Requirement Vehicle must have a rear-left passenger door
Visible / Reference Number 50594A1
Condition Used original vehicle component
Primary Material Moulded automotive-grade plastic with mechanical release components

Compatibility Chart

Make Model Generation Years Body Position Status
Toyota Corolla E12 / E120 2002–2007 5-door hatchback Rear Left Match existing part / VIN verification recommended
DO NOT ORDER BY MODEL NAME ALONE.

Do not assume fitment to a 3-door Corolla: a 3-door vehicle does not have a rear-left passenger door. Do not assume fitment to a different Corolla generation. Do not assume that another Toyota carrying the marking 50594A1 is automatically compatible. Do not order for the right-hand rear door. Do not order where the shape, mounting arrangement, finish or mechanism differs from the photographs.

Other Toyota Applications — Important Warning

The reference 50594A1 has also been recorded on handles removed from other Toyota vehicles, including examples of the Avensis T25.

THIS DOES NOT MEAN THIS PARTICULAR HANDLE IS CONFIRMED FOR EVERY VEHICLE CARRYING 50594A1.

We deliberately do not advertise those vehicles as guaranteed compatibility without a VIN/full Toyota catalogue number and matching physical specification.

If you own another Toyota and believe this part matches, contact us with the VIN before purchasing.

Where Is This Part Fitted?

The handle is mounted on the inside face of the rear-left passenger door. It forms part of the mechanical door-release system.

When the lever is pulled, the handle transfers movement through the door's release linkage to the latch mechanism, allowing the door to be opened from inside when the lock/child-lock configuration permits.

Toyota Corolla E12 rear left door showing interior handle location
Reference E12 rear-left door assembly showing the area in which the interior release handle is installed.

Common Symptoms Of A Faulty Interior Handle

  • Interior handle lever has snapped or cracked.
  • Handle feels loose or has excessive movement.
  • Lever moves but the door does not release normally.
  • Handle does not return cleanly after being pulled.
  • Visible damage around the pivot or cable/linkage attachment.
  • Passenger has to open the door using the exterior handle.
  • Intermittent door release caused by worn handle attachment points.
  • Handle surround or mounting points are damaged.

A non-functioning interior handle can make normal passenger exit inconvenient and, depending on the nature of the fault, potentially unsafe. Diagnose the complete door-release system before replacing components because a faulty latch, linkage or child-lock mechanism can produce similar symptoms.

Why Choose A Used Original Vehicle Part?

Factory Geometry An original used component was manufactured for the vehicle application rather than being reverse-engineered as a low-cost universal replacement.
Correct Mounting Design Original mounting points, lever geometry and linkage arrangements can reduce installation problems when the correct part is selected.
Material & Feel Original interior components generally retain the intended shape, texture and operating feel of the vehicle interior.
Excellent Value Used components can provide substantial savings compared with purchasing the equivalent component new. Depending on the component and market price, savings can sometimes approach 70%.

Cheap reproduction components can vary in plastic composition, finish, pivot quality, dimensions and mounting tolerances. For an older vehicle, a correctly matched original used component can therefore be an excellent balance of fit, appearance, durability and value.

Installation Guide

Installation details can vary by Corolla specification. The procedure below is a general workshop guide rather than a substitute for Toyota workshop information. If uncertain, use a competent automotive technician.

Suggested Tools

  • Phillips screwdriver
  • Small flat-blade screwdriver or pick
  • Plastic interior trim removal tools
  • Suitable socket/ratchet if required by your door trim specification
  • Work light
  • Protective gloves

General Procedure

  1. Park safely, switch the ignition off and make sure the door is securely supported and accessible.
  2. Inspect the replacement part against the existing handle before dismantling anything.
  3. Remove the appropriate handle fixing and any trim necessary to access the release mechanism.
  4. Carefully release the handle from the door trim without forcing surrounding plastic components.
  5. Disconnect the mechanical release linkage/retaining clip from the old handle.
  6. Compare both handles side-by-side, including mounting points, linkage location and orientation.
  7. Connect the release linkage to the replacement handle and ensure the retaining clip is correctly secured.
  8. Reinstall the handle and any removed trim.
  9. Before closing the door, operate the mechanism several times and verify correct latch release.
  10. Check the lock and child-lock functions before returning the vehicle to service.

Estimated Fitting Time & Garage Labour Calculator

For a straightforward interior-handle replacement where no seized or damaged associated components are found, allow approximately 0.3–0.7 labour hours. Actual time depends on vehicle specification, trim removal and the condition of the existing mechanism.

LABOUR COST FORMULA = GARAGE HOURLY RATE × ACTUAL LABOUR HOURS

Garage Rate 0.3 hr 0.5 hr 0.7 hr
£50/hour £15 £25 £35
£60/hour £18 £30 £42
£75/hour £22.50 £37.50 £52.50
£90/hour £27 £45 £63
£100/hour £30 £50 £70
£120/hour £36 £60 £84

Figures are illustrative labour estimates only and exclude parts, diagnostics, VAT where applicable and additional work.

🔧 Fitting & Repair Service Available

Professional vehicle repair workshop reference image

Need the part installed? ThePartPilot can also assist with fitting and vehicle repairs subject to workshop availability and prior booking.

Contact us before travelling so that availability and the required work can be confirmed.

25,000+ Parts In Stock

Automotive parts warehouse reference image

ThePartPilot operates with a substantial stockholding of vehicle components, with more than 25,000 parts on the shelf at any one time.

If this is not the component you require, contact us with your VIN and details of the part required.

Warehouse photograph is a representative automotive-parts storage image and is not presented as a photograph of ThePartPilot's premises.

📦 Worldwide eBay Shipping

International orders are available through eBay's Global Shipping Programme / applicable eBay international shipping service where the item and destination are eligible.

eBay calculates the international postage, applicable import charges and available destination at checkout. Availability varies according to destination, parcel restrictions and eBay programme rules.

International buyers: use the delivery quote displayed by eBay for your actual destination. International tracking is available through eligible eBay international shipping transactions.

📍 Collection — 7 Days A Week

Collection available until 8PM by prior appointment.

Collections can be arranged 7 days a week, including bank holidays, subject to prior appointment.

Please arrange the collection before travelling so that the part can be located and prepared.

WhatsApp QR code for ThePartPilot

Scan to contact ThePartPilot on WhatsApp


Before You Buy — Our Correct Part Checklist

1. Confirm you have a Toyota Corolla E12/E120 application.

2. Confirm you require the REAR LEFT interior handle.

3. Compare your existing handle directly with every available listing photograph.

4. Compare the visible reference 50594A1.

5. Check the lever orientation, colour, mounting points and linkage attachment.

6. If anything differs or you are uncertain, contact us with the VIN before purchasing.

Vehicles / Applications This Listing Should NOT Be Assumed To Fit

Vehicle / Situation Fitment Status Reason
Corolla 3-door hatchback NO for rear-left application 3-door body does not have a rear-left passenger door.
Right rear door NO This listing is for the left-hand rear position.
Other Corolla generations NOT CONFIRMED Do not assume compatibility from the Corolla name alone.
Toyota Avensis T25 NOT CONFIRMED FROM THIS LISTING 50594A1 appears on some Avensis handles but the marking alone is insufficient for a guaranteed cross-fit.
Other Toyota models NOT CONFIRMED VIN/full Toyota catalogue number required before cross-model fitment is claimed.

Returns & Correct Ordering

Please use the compatibility information and photographs carefully before ordering. We invest significant time in identifying components to help customers order the correct part first time.

If you are uncertain, contact us before purchase for fitment assistance. For the highest-confidence verification we may request the vehicle's VIN and/or the complete number from the component being replaced.

Returns are handled in accordance with the return terms displayed on the eBay listing, eBay policies and applicable consumer law. Nothing in this description limits rights that cannot legally be excluded.

Important Delivery Address Information

PLEASE CHECK YOUR DELIVERY ADDRESS BEFORE COMPLETING CHECKOUT.

Orders are dispatched to the address supplied through the eBay transaction. For security and seller-protection reasons we cannot simply redirect an order to a different address after checkout.

If your checkout address is incorrect, contact us immediately before dispatch so the appropriate eBay-compliant solution can be considered.

VAT / Invoice Information

Where a used vehicle component is sold under an applicable used-goods margin scheme, VAT is not separately itemised on the invoice.

Any applicable tax or import charge on an international transaction is determined according to the transaction and destination and may be collected by eBay at checkout.

♻️ Why Used Parts Make Sense

♻️ Reuse Existing Components Keeping serviceable automotive components in circulation reduces unnecessary disposal.
🌍 Reduce Manufacturing Demand Reusing an existing component can avoid some of the material and manufacturing demand associated with producing a replacement.
💷 Save Money Used original components can provide major savings against the price of buying the equivalent component new.
🤝 Support A Small UK Business Every purchase helps support an independent automotive-parts business, its stockholding, testing, packing and customer support.

Choosing a quality used vehicle component isn't only about price. It gives an existing part another useful life, helps reduce automotive waste and supports the circular economy. 🌍♻️🚗

🚗 We Also Buy Cars For Cash

Cars wanted nationwide.

  • Nationwide vehicle collection available
  • Same-day payment available where agreed
  • Cars considered in a wide range of conditions
  • Contact us with registration/VIN, mileage, condition and photographs for a quotation

📦 Carefully Prepared For Dispatch

Used vehicle components are selected from stock and prepared for dispatch with appropriate packaging for the nature of the component.

Please remember that this is a used component. Cosmetic marks consistent with age and previous use may be present. Always inspect the actual listing photographs for the condition of the item being supplied.

THEPARTPILOT

PARTS • FITMENT SUPPORT • FITTING • REPAIRS • VEHICLE PURCHASING

25,000+ parts in stock • Worldwide eBay shipping • Collection by appointment

BUY THE CORRECT PART FIRST TIME.

THEPARTPILOT • THEPARTPILOT • THEPARTPILOT • THEPARTPILOT

Vehicle and workshop photographs used within this description are reference / illustrative images unless expressly identified as photographs of the item for sale. Vehicle manufacturers and model names are used for identification and compatibility purposes.

You may also like