Toyota Corolla Verso R1 2004-2009 High Level 3rd Brake Stop Light 81570-0F011

thePartPilot

TOYOTA COROLLA VERSO R1 / AR10

High Level 3rd Brake / Centre Stop Lamp

PART NO. 81570-0F011

PLEASE CHECK FITMENT BEFORE ORDERING

This listing is for the Toyota Corolla Verso / Verso R1 (AR10 family) 5-door MPV. The physical lamp in this listing is visibly marked 81570-0F011. Match that number and your vehicle details before purchase. If there is any doubt, send your full 17-character VIN through eBay Messages so fitment can be checked against the vehicle catalogue before you order.

Actual Part For Sale

Brand	Toyota
Part	Rear high-level third brake light / centre stop lamp assembly
Part number	81570-0F011 / compact format 815700F011
Earlier catalogue number	81570-0F010 - catalogued as superseded by 81570-0F011 for early 02/2004-07/2004 applications
Position	Rear upper tailgate / top of rear glazing area
Light source	Five 12V 5W bulb positions are shown in the Toyota parts catalogue
Construction	Red moulded plastic lens/housing, metal mounting/backing section and perimeter foam sealing strip, as visible in the item photographs
Condition	Used original factory Toyota component. Please inspect every actual-item image for cosmetic condition before purchase.

Verified Vehicle Fitment

Vehicle	Body	Engine / UK range	Model code	Fitment period / note
Toyota Corolla Verso / Verso R1	5-door MPV	1.6 VVT-i petrol, 3ZZ-FE	ZNR10	Within the R1 family 2004-2009; confirm VIN/build date and lamp number
Toyota Corolla Verso / Verso R1	5-door MPV	1.8 VVT-i petrol, 1ZZ-FE	ZNR11	Catalogue family coverage 02/2004-02/2009
Toyota Corolla Verso / Verso R1	5-door MPV	2.0 D-4D diesel, 1CD-FTV	CUR10	Early R1 diesel; Toyota UK states this engine was replaced in the range by the 2.2 diesel from Nov 2005
Toyota Corolla Verso / Verso R1	5-door MPV	2.2 D-4D 140, 2AD-FTV	AUR10	From late 2005 through the R1/AR10 production period; VIN confirmation recommended
Toyota Corolla Verso / Verso R1	5-door MPV	2.2 D-4D 180 / D-CAT, 2AD-FHV	AUR10	From late 2005 through the R1/AR10 production period; VIN confirmation recommended

• Toyota Corolla E14/E15 saloon 2008-2014 - this is not the catalogue application for 81570-0F011.
• Earlier Corolla Verso E120 generation before the R1/AR10 family - not covered by this part-number application.
• Later Toyota Verso generation from 2009 onward - not covered by this R1/AR10 part-number application.
• Any vehicle where the original lamp has a different mounting arrangement, connector or part number unless a VIN-based Toyota catalogue check confirms a supersession.

Correct 5-Door Vehicle Reference

Where It Fits & What It Does

This assembly is the high-level third brake light / centre stop lamp positioned at the upper rear of the Corolla Verso R1/AR10 tailgate area. It illuminates when the service-brake stop-lamp circuit is activated, giving following traffic an additional high-mounted red brake signal.

It does not control the braking system. It is a lighting output component. If the lamp is not working, the root cause can be the lamp/bulbs or elsewhere in the stop-lamp electrical circuit, so diagnosis before replacement is recommended.

Common Symptoms & Checks

Why Choose an Original Factory Toyota Used Part?

• Correct factory geometry: mounting points, housing shape, seal interface and electrical connection were designed for the vehicle family.
• Known reference number: 81570-0F011 can be checked against the number on the vehicle and against Toyota catalogue data.
• Better return prevention: matching a visible factory number and VIN is more reliable than buying from a vague vehicle description alone.
• Used value: selected used parts can save up to 70% versus new-part pricing; actual savings vary by part and current market price.
• Reuse matters: extending the service life of an existing component can reduce demand for replacement manufacturing and keep usable automotive material in circulation.

Fitting Guide

1. Confirm the fault before removing parts. Check brake-light operation and inspect the relevant fuse/circuit, connector and bulbs where appropriate.
2. Open the tailgate and protect surrounding trim and painted surfaces.
3. Carefully remove the upper inner tailgate trim required to access the centre-stop-lamp connection and retaining hardware. Use a plastic trim tool to reduce marking.
4. Disconnect the lamp electrical connector without pulling on the wiring.
5. Remove the retaining nut/fastener shown by the Toyota parts catalogue and release the lamp carefully from the tailgate area.
6. Compare the removed unit directly with the replacement: part number, connector, mounting ears/studs, lens profile and sealing strip.
7. Inspect the replacement seal and bulb holders. The catalogue specifies five 12V 5W bulb positions for this lamp family.
8. Fit the replacement without over-tightening the plastic housing or mounting points. Ensure the seal sits evenly to reduce water ingress.
9. Reconnect the electrical connector and test all stop lamps before refitting trim.
10. Refit the trim, then perform a final brake-light and moisture/seal check.

Suggested Tools

Plastic trim removal tools; small ratchet and suitable socket set; suitable screwdrivers for fitted trim; torch; work gloves; and a multimeter or 12V test lamp if electrical diagnosis is required. The exact socket/fastener size should be checked on the vehicle rather than guessed.

Estimated Repair Time & Labour Cost Guide

Garage Rate	0.5 Hour	0.75 Hour	1.0 Hour
£40/hr	£20	£30	£40
£50/hr	£25	£37.50	£50
£60/hr	£30	£45	£60
£75/hr	£37.50	£56.25	£75
£90/hr	£45	£67.50	£90
£100/hr	£50	£75	£100
£120/hr	£60	£90	£120
£150/hr	£75	£112.50	£150

Fitting Service Available

25,000+ Parts In Stock

How to find us / WhatsApp

VAT & Returns

VAT margin / Global Accounting: where this item is sold under the Global Accounting VAT margin scheme, VAT is accounted for under the scheme and is not shown separately on the sales invoice. There is no separately stated VAT amount for the buyer to reclaim.

Returns: returns are handled through eBay and the return policy shown on the listing. A refund deduction of up to 50% is not an automatic restocking fee; it may only be used where eBay policy allows and to recover an actual loss in value when an item is returned in a materially different condition. This does not remove a buyer's statutory or eBay rights where applicable.

Buy The Correct Part First Time

1. Match the number on your original lamp to 81570-0F011.
2. If your early 2004 lamp reads 81570-0F010, do not rely on the number alone; confirm the VIN because the catalogue shows 81570-0F011 as the superseding number for the early application.
3. Confirm your vehicle is the Corolla Verso / Verso R1 AR10-family 5-door MPV, not a Corolla saloon/hatchback and not the later 2009-on Verso generation.
4. If anything is uncertain, send the full VIN via eBay Messages before ordering so it can be decoded and checked against catalogue data.

Support Small Business & Reuse Good Parts

thePartPilot - PARTS WITH A FLIGHT PLAN

Fitment protection: vehicle registration year alone is not enough for a safety-critical fitment decision. Part number, build data and VIN take priority. Reference/stock images are clearly labelled and are not photographs of thePartPilot premises unless stated otherwise.