Toyota RAV4 Mk2 2001-2005 Anti Theft Alarm ECU Module 08190-12930 237000-2260
Toyota RAV4 Mk2 2001-2005 Anti Theft Alarm ECU Module 08190-12930 237000-2260
| π‘οΈ 30 DAY WARRANTY | π§ FITTING AVAILABLE* | π¦ 25,000+ PARTS IN STOCK | π INTERNATIONAL DELIVERY* |
A pre-owned original Toyota-branded TVSS / anti-theft alarm control module identified by the numbers 08190-12930 and 237000-2260. This listing has been built around part-number, label and connector matching rather than relying on year/model alone.
Your existing module should show 08190-12930 AND 237000-2260, and the electrical connector, housing shape and mounting arrangement should visually match the photographs below. A matching vehicle year by itself is not enough. If any number or connector differs, please message us through eBay Messages before purchasing.
| Detail | Information |
|---|---|
| Vehicle Brand | Toyota |
| Primary Application | Toyota RAV4 Mk2 / XA20 |
| Primary Fitment Range | 2001β2005 β exact module-number match required |
| Component | TVSS / anti-theft alarm control ECU module |
| Manufacturer Part Number | 08190-12930 |
| Reference / Engineering Number | 237000-2260 |
| Interchange Part Number | 0819012930 / 2370002260 β formatting variants of the numbers above |
| Superseded Part Number | No independently verified Toyota supersession included β match the two numbers above |
| Housing Colour | Black |
| Construction | Moulded electrical-module housing with integrated electrical connector and mounting provision |
| Country of Origin | Japan |
| Condition | Pre-owned component; please inspect all supplied photographs for cosmetic condition |
| Warranty | 30 days |
| eBay Item Number | 147479020732 |
| VAT | Sold under applicable VAT Margin / Global Accounting treatment. VAT is not separately itemised and no reclaimable VAT invoice is available. |
This electronic control module forms part of the Toyota vehicle-security / alarm system. Depending on the exact vehicle specification it participates in the monitoring and control of the security system and associated alarm functions.
Because Toyota security systems can differ by market, specification and installed alarm equipment, the safest replacement method is to match both numbers on the original module and the physical connector. Do not assume another black Toyota alarm box is interchangeable simply because it came from the same year of vehicle.
If diagnosis has established that the alarm-control module itself is at fault, possible symptoms may include:
π΄ Alarm system failing to arm or respond correctly
π΄ Intermittent or unexpected alarm operation
π΄ Alarm trigger inputs not being recognised correctly
π΄ Siren / warning-output behaviour not operating as expected
π΄ Security-system faults that remain after wiring, fuses, switches,
sensors and power supplies have been checked
| Vehicle | Years | Body / Generation | Fitment Status |
|---|---|---|---|
| Toyota RAV4 | 2001β2005 | Mk2 / XA20 |
PRIMARY APPLICATION Must match 08190-12930 + 237000-2260 + connector. |
| Toyota Celica | 1999β2006 | Mk7 / T230 |
CROSS-APPLICATION Same module number is documented in this vehicle family. Buy only where the removed module carries the same numbers and connector. |
| Toyota MR2 Roadster | 1999β2007 | Mk3 / ZZW30 |
CROSS-APPLICATION Same module-number family is documented. Exact-number and connector comparison is compulsory. |
| Toyota Previa / Estima | Documented examples include 2005β2006 | Market/specification dependent |
NUMBER-MATCH ONLY Do not purchase by model/year alone. |
Alarm specification can differ. The final authority for this listing is the identification on your existing component: 08190-12930 / 237000-2260 together with an identical connector and mounting arrangement.
β A RAV4 with a different alarm ECU part number
β A RAV4 with a different connector or mounting arrangement
β Later RAV4 generations simply because the vehicle is called RAV4
β Earlier RAV4 generations without an exact matching module label
β Celica, MR2, Previa or any other Toyota solely because it appears in
a cross-reference β the original module must match
β Any vehicle where the existing part cannot be positively identified
| Check | What You Need To Confirm |
|---|---|
| 1 β Toyota Number | Your removed part reads 08190-12930 |
| 2 β Secondary Number | Your removed part reads 237000-2260 |
| 3 β Connector | Plug shape, latch position and terminal layout visually match our photographs |
| 4 β Housing / Mounting | Housing shape and mounting points match the unit being removed |
These images are supplied as body/generation references only. They are not photographs of the donor vehicle for this particular item. Both long- and short-wheelbase XA20 body styles exist; body style alone must never replace part-number matching.
With electronic security components, matching the correct factory specification can be particularly important. A correctly matched Toyota-branded module provides the original connector architecture, mounting arrangement and intended vehicle-system integration rather than relying on an unknown universal substitute.
A pre-owned original-manufacturer component can also provide a much more economical repair route compared with purchasing a new dealer component, where a new part is still available. Actual savings vary significantly by component, vehicle and current new-part pricing, so no fixed saving percentage is guaranteed.
Most importantly, correct identification beats cheap price. A low-cost substitute is not a saving if the connector, software, signalling or mounting does not match the vehicle.
Suggested workshop equipment:
β’ Plastic trim-removal tools
β’ Suitable socket and ratchet set
β’ Screwdriver set
β’ Inspection lamp / torch
β’ Multimeter for electrical diagnosis where required
β’ Suitable diagnostic equipment where programming or fault-code work is required
General replacement sequence:
1. Confirm the fault has been diagnosed to the alarm ECU
rather than wiring, fuses, battery condition, switches or sensors.
2. With the ignition switched off, follow the correct
battery-disconnection procedure for the vehicle before disturbing
electrical components. Be aware that radio/security settings may need
to be retained or reset depending on vehicle specification.
3. Gain access to the original alarm module using the
correct trim-removal procedure for your vehicle.
4. Before disconnecting anything, photograph the original
unit and verify 08190-12930 / 237000-2260 against this listing.
5. Compare the connector, latch, housing and mounting
arrangement side-by-side with the replacement.
6. Release the electrical connector by its proper locking
mechanism. Never pull directly on the wiring loom.
7. Remove the module from its mounting and install the
replacement securely in the same position/orientation.
8. Reconnect the electrical connector and refit removed trim.
9. Reconnect the battery in accordance with workshop
procedure and test alarm/security functions.
10. If correct operation is not restored, perform
diagnostic testing rather than repeatedly replacing components.
Because active calculators require JavaScript and JavaScript is not permitted in eBay descriptions, use the static table below.
Planning time: allow approximately 0.5β1.0 labour hour for a straightforward module replacement once the component location is established. Diagnosis, difficult trim access and any coding/programming work are extra. This is a planning estimate and not a Toyota flat-rate time.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| Β£60 / hour | Β£30 | Β£45 | Β£60 |
| Β£80 / hour | Β£40 | Β£60 | Β£80 |
| Β£100 / hour | Β£50 | Β£75 | Β£100 |
| Β£120 / hour | Β£60 | Β£90 | Β£120 |
| Β£150 / hour | Β£75 | Β£112.50 | Β£150 |
Formula: Garage hourly rate Γ labour time = estimated labour charge.
ThePartPilot carries more than 25,000 automotive parts in stock at any one time, helping us support a wide range of vehicles and repair requirements.
π§ Mechanical parts Β β’ Β β‘ Electrical components Β β’ Β π Body and trim parts Β β’ Β π¦ Carefully prepared dispatches
π¦ Orders are securely prepared for dispatch.
π International delivery may be available to eligible destinations
through eBay's Global Shipping Programme. International availability,
postage cost, customs charges, taxes and eligible destinations are
calculated/displayed by eBay for the buyer at checkout where applicable.
Your order will be processed using the delivery address supplied through eBay checkout. Please make sure it is complete and correct before paying, as we cannot manually substitute a different delivery address after the order has been placed.
No promise of free postage is made in this description. Please use the postage information displayed by eBay on the listing/checkout for the current service and charge.
We want the correct part to arrive the first time. Please make all reasonable checks before fitting, especially the part-number label, connector and mounting arrangement.
Returned parts should be sent back in the condition required by the applicable eBay returns policy. Where a returned component has been installed, damaged, altered, incompletely returned or otherwise suffers a loss in value, any permitted refund adjustment will be handled only in accordance with applicable law and eBay's current seller-protection and returned-item-condition rules.
Compare the part numbers and physical connector before installation. If unsure, ask us through eBay Messages first.
Thank you for supporting ThePartPilot and an independent UK automotive parts business. Choosing a serviceable pre-owned component can help keep an existing vehicle on the road while extending the useful life of parts that might otherwise be discarded.
β»οΈ Reuse before replacement β extending a component's
useful life can reduce unnecessary waste.
π§ Repair rather than discard β the right part can help
make an otherwise uneconomical repair viable.
π Keep vehicles moving β supplying hard-to-find parts
supports the continued repair of older cars.
π Support independent business β every order helps us
continue sourcing, identifying, storing and supplying automotive parts.
WhatsApp QR for Fitment Help / Appointment EnquiriesΒ
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.Β Β Β ΒΒ Β
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.Β Β