TOYOTA YARIS HYBRID NHP130 2013-2019 CENTRAL LOCKING CONTROL MODULE

This listing is for a Toyota Yaris Central Locking Control Module used within the vehicle's central locking / double-lock door security system.

The physical module is marked by Toyota/Denso as “DOUBLE LOCK DOOR CONTROL”, while the donor identification marking on the component identifies its practical vehicle function as Central Locking.

For buyer clarity and search accuracy we therefore describe this component as: Central Locking Control Module / Double Lock Door Control Unit.

This electronic control module forms part of the Toyota Yaris central locking and double-lock security system.

The module is involved in controlling electrical commands associated with vehicle locking and the additional double-lock / deadlock security function. It operates alongside the vehicle's door-lock actuators, switches, wiring and other body-control electronics.

The double-lock function is designed to provide an additional level of vehicle security by preventing normal interior unlocking operation when the appropriate security mode is activated.

Primary application is the Toyota Yaris Mk3 / XP130 generation, including the NHP130 5-door Hybrid application described below.

We take fitment seriously because matching the correct component first time reduces wasted time, unnecessary returns and workshop delays.

Your existing part number is more important than registration year alone.

Toyota may use different electrical modules according to vehicle specification, production date, body style, equipment level and market.

Before purchase check all of the following:

✓ Toyota number 85970-52050
✓ Denso number 051500-4341 where visible
✓ Central locking / Double Lock Door Control designation
✓ Electrical connector
✓ Connector keying
✓ Metal mounting bracket
✓ Housing shape
✓ Vehicle generation

If unsure, contact us through eBay Messages before purchasing and we can help verify fitment.

A fault within the central locking / double-lock system may cause symptoms such as:

• Central locking failing to operate
• Intermittent locking or unlocking
• Doors refusing to lock from the remote
• Double locking / deadlocking failing to engage
• Double locking failing to disengage correctly
• Locks responding inconsistently
• One or more locking commands not being carried out correctly
• Locking-related diagnostic trouble codes
• Locking operation working only intermittently

When replacing an electronic vehicle module, matching the original factory part number offers major advantages over an unknown low-cost copy.

A correctly matched Toyota/Denso component is designed around the vehicle's original electrical connector, mounting points, voltage requirements and vehicle-control system.

Potential benefits include:

✓ Correct factory connector design
✓ Correct bracket and mounting geometry
✓ Factory electrical specification
✓ Proven compatibility when exact numbers match
✓ Better chance of correct communication with existing vehicle electronics
✓ Avoidance of poorly manufactured low-cost replacement copies

A quality pre-owned factory component can potentially save as much as 70% compared with purchasing a new replacement, depending on current new-part pricing.

Estimated component replacement time: approximately 30-60 minutes once the correct module has been located and access established.

Workshop diagnosis + replacement allowance: approximately 1-2 hours.

• Interior trim removal tools
• Socket and ratchet set
• 10mm socket where applicable
• Screwdriver set
• Torx bit set
• Torch / inspection lamp
• Multimeter
• Suitable diagnostic scan tool
• Protective gloves

1. Locate the original central locking module and confirm 85970-52050 before removing anything.

2. Switch the vehicle ignition fully off.

3. Follow the correct vehicle 12V battery isolation procedure.

4. Remove the required trim panels carefully using plastic trim tools.

5. Photograph the original module orientation, bracket and wiring position.

6. Release the electrical connector carefully without pulling on the wiring.

7. Remove the original module and bracket fixing.

8. Install the replacement unit in the same orientation.

9. Reconnect the electrical plug and ensure the locking mechanism is fully engaged.

10. Reassemble removed trim.

11. Restore battery power correctly.

12. Test locking, unlocking and double-lock operation.

13. Scan the vehicle for stored diagnostic faults if appropriate.

Because active JavaScript is not used in eBay descriptions, use this static labour calculator to estimate garage charges.

Illustrative labour estimate only. Actual diagnosis, programming, workshop rates and additional repair requirements may change the final charge.

ThePartPilot carries more than 25,000 vehicle parts in stock and on the shelf at any one time.

Vehicle electronics require careful handling during transport. We aim to protect connectors, mounting brackets, housings and vulnerable electrical components during packing and dispatch.

📦 Protective packaging
🔌 Connector protection
🧱 Bracket support where required
🏷️ Order identification
♻️ Recyclable packaging where practical

International delivery is available to eligible destinations through eBay's international shipping programme.

Shipping availability, import charges, customs handling and eligible destinations are determined by eBay and shown during checkout.

The destination and shipping charge shown by eBay checkout should always be treated as the final shipping information for your order.

Please use the compatibility information and part-number photographs before purchasing.

If you are uncertain, contact us through eBay Messages before ordering and we can help check the part details.

Returns are handled according to the return conditions displayed on the eBay listing and applicable eBay policies.

Where a returned item has been installed, altered, damaged or returned in a condition that materially reduces its value, any permitted deduction will only be applied in accordance with applicable eBay rules.

We also purchase suitable cars for parts recycling and dismantling.

Nationwide collection and same-day payment may be available subject to vehicle details, agreed purchase price and collection availability.

Please enquire through eBay Messages.

Buying a quality pre-owned vehicle component supports an independent parts business while keeping serviceable automotive parts in circulation.

Reusing suitable components can reduce waste, reduce demand for newly manufactured replacement parts and help keep vehicles economically repairable for longer.

Thank you for supporting ThePartPilot.

If your existing part differs, do not order until fitment has been verified.

WhatsApp QR for Fitment Help / Appointment Enquiries