Toyota Yaris MK1 NCP13 T Sport 1.5 2001-02 Headlight Adjuster Switch 84152-52030

Do not order using registration year alone. Before purchasing, compare your original switch with our photographs and confirm: 84152-52030, connector/wire arrangement, mounting tabs, housing shape and the numbered 0–3 adjustment wheel.

Verified catalogue application: Toyota Yaris Mk1 / XP10 / NCP13 T Sport / TS 1.5, production 01/2001 to 11/2002.

Interior image attribution: “Toyota Yaris I 1.5 TS interior” by PPaw, Wikimedia Commons, CC BY-SA 4.0. The image depicts a 2001 Yaris TS 3-door pre-facelift interior.

This dashboard rotary control tells the vehicle's headlamp-levelling system to alter the vertical beam position. The 0–3 settings allow the driver to compensate for changes in vehicle loading so that the headlight beam remains appropriately positioned.

It is a beam-height adjustment control — it is not the main headlight on/off switch.

• Headlamp beam height does not respond when the 0–3 wheel is moved.
• Adjustment works only at certain switch positions.
• Intermittent headlamp-level adjustment.
• Rotary wheel feels loose, damaged, stiff or physically broken.
• Damaged switch casing, retaining tabs, connector or wiring.
• Switch illumination or internal electrical contact fault.

A correctly identified original manufacturer component was engineered around the vehicle's original dashboard aperture, mounting clips, electrical connector and control system.

• Correct physical dimensions for the intended application.
• Correct connector arrangement when matched by engineering number.
• Original mounting design rather than a generic approximation.
• Known engineering number that can be checked before purchase.
• Reduced fitment uncertainty compared with choosing an unnamed copy solely from a photograph.

• Plastic / non-marring trim-removal tool
• Small trim pick or suitable flat trim tool
• Torch / inspection light
• 10 mm socket or spanner if battery disconnection is required
• Optional multimeter or automotive test light for diagnosis

1. Park safely, switch the ignition off and remove the key.
2. Protect surrounding dashboard trim from marking.
3. If your repair procedure requires battery disconnection, follow appropriate vehicle safety procedures and allow electrical/SRS systems to power down.
4. Carefully release the appropriate lower dashboard switch trim/bezel using a non-marring trim tool.
5. Release the retaining clips holding the headlamp-level switch in the panel.
6. Disconnect the electrical connector without pulling directly on the wires.
7. Before installation, compare your removed switch directly with the listing photographs and confirm 84152-52030.
8. Connect the replacement switch and seat it securely into the trim panel.
9. Switch the headlamps on and test settings 0, 1, 2 and 3 while observing beam movement against a suitable flat surface.
10. Refit all trim securely. If headlamp aim is questionable, have the lighting system checked and adjusted professionally.

Because eBay descriptions do not use JavaScript here, this calculator is intentionally a static reference table. For this estimated 15–30 minute switch replacement:

Labour-only illustration. Actual garages may apply a minimum labour charge and additional costs for diagnosis, electrical testing, headlamp aiming, consumables or other work. For another hourly rate: divide the hourly rate by 4 for a 15-minute estimate or by 2 for a 30-minute estimate.

Fitting and repair services may be available subject to workshop availability. Please contact us through eBay Messages before purchasing if you require fitting availability or pricing.

1. Check your removed component is stamped 84152-52030.
2. Confirm your car is a Yaris Mk1 / XP10 / NCP13 T Sport / TS 1.5.
3. Check production date is within the verified range, particularly around the late-2002 changeover.
4. Compare the electrical connector and individual wire positions.
5. Compare the mounting clips, housing shape and 0–3 front-wheel design.
6. If any detail differs, stop and ask us through eBay Messages for fitment assistance before ordering.

Where this item is sold under the VAT Global Accounting / second-hand margin scheme, VAT is not separately itemised and no separately reclaimable VAT amount is shown on the sale.

UK delivery and international delivery through eBay's eligible shipping programme are offered where shown on the listing. International postage charges, import costs, destination restrictions and availability are calculated or controlled by eBay and shown to the buyer at checkout.

International programme eligibility can change and some products/destinations may be restricted. The destination and postage options actually displayed by eBay at checkout always take priority over this reference list.

Please ensure your delivery address shown during eBay checkout is completely correct before payment. We cannot manually alter the checkout delivery address for you after an order has been placed.

We provide detailed part-number, vehicle, production-date and visual-fitment information specifically to help buyers order the correct component first time.

Before installation, compare the replacement with your removed part. Please do not cut wiring, alter connectors, modify mounting tabs or otherwise change the item until you are satisfied it is the correct component.

Returns are handled under the return terms displayed by eBay and applicable buyer rights. Where eBay permits a deduction because an item has been returned in a materially different condition, any deduction relates to the actual loss in value caused by use, damage, missing components or inadequate return packaging.

Unsure about fitment? Send your original engineering number and relevant vehicle details through eBay Messages before ordering.

Thank you for supporting a local small business. Choosing a serviceable used vehicle component keeps an existing part in useful circulation rather than unnecessarily discarding it.

Reuse can help reduce automotive waste and the demand for additional manufacturing, raw materials and packaging where an existing component still has useful service life. It can also offer substantial savings compared with purchasing a new replacement.

Better fitment information + responsible reuse + careful part-number checking = fewer incorrect orders and fewer unnecessary returns. ♻️