TOYOTA YARIS MK2 XP90 2005-2011 FRONT RIGHT DRIVER DOOR WEATHERSTRIP RUBBER SEAL
TOYOTA YARIS MK2 XP90 2005-2011 FRONT RIGHT DRIVER DOOR WEATHERSTRIP RUBBER SEAL
TOYOTA YARIS MK2 XP90 2005–2011
FRONT RIGHT DRIVER DOOR WEATHERSTRIP RUBBER SEAL
The actual component shown in this listing carries the handwritten donor identification “YARIS 2007 OSF”. This confirms a 2007 Toyota Yaris and Offside Front / Right Front donor position.
This component is from the Toyota Yaris Mk2 / XP90 2005–2011 model family, but Toyota used different right-front door seals depending on 3-door / 5-door body style and manufacturing location.
DO NOT ORDER USING THE YEAR ALONE. Compare your existing seal, body style and moulded part number with the compatibility chart below.
ACTUAL ITEM PHOTOGRAPHS
These are photographs of the actual component associated with this listing. Compare the shape, moulded corners, retainers and overall profile against your existing part.
ITEM DETAILS & SPECIFICATIONS
| Manufacturer | Toyota |
| Vehicle | Toyota Yaris Mk2 / XP90 |
| Model Family Years | 2005–2011 |
| Photo-Verified Donor Year | 2007 |
| Visible Donor Marking | YARIS 2007 OSF |
| Part Type | Front door perimeter weatherstrip / rubber door seal |
| Placement | Front Right / Offside Front / Driver Side on UK RHD vehicle |
| Colour | Black |
| Material | Automotive-grade rubber / elastomer weather-sealing profile |
| Condition | Pre-owned automotive component. Inspect all photographs carefully for cosmetic condition and age-related marks. |
| Included | 1 × right-front door weatherstrip as photographed |
| Interchange Part Number | See compatibility chart below — exact individual number must be matched before purchase |
| Superseded Part Number | 67861-52150 → 67861-52151 where applicable to the corresponding Japan-built 5-door application |
| eBay Item Number | 147476574901 |
🚗 WHERE IS THE PART FITTED?
The weatherstrip follows the perimeter of the front-right door. When the door closes, the rubber profile compresses against the vehicle body to help control water entry, outside air, dust and road/wind noise.
WHAT DOES THE WEATHERSTRIP DO?
💧 Helps reduce water entering around the door aperture.
💨 Helps reduce wind noise around the driver's door.
🧹 Helps limit dust and road contamination entering the cabin.
🚘 Helps maintain correct sealing between the door and vehicle body.
🔇 Helps maintain the vehicle's intended acoustic isolation.
TOYOTA YARIS MK2 / XP90 2005–2011 COMPATIBILITY GUIDE
Toyota lists different right-front weatherstrip numbers depending on door configuration and manufacturing location. Match your existing moulded number to the applicable row.
| Vehicle | Body / Build | Exact Production Period | RH Front Weatherstrip |
|---|---|---|---|
| Toyota Yaris Mk2 / XP90 | 3 Door • Japan Built |
2005–2011 Aug 2005 – Jul 2011 |
67861-52160 |
| Toyota Yaris Mk2 / XP90 | 5 Door • Japan Built |
2005 Aug 2005 – Sep 2005 |
67861-52150 → 67861-52151 |
| Toyota Yaris Mk2 / XP90 | 5 Door • Japan Built |
2005–2011 Oct 2005 – Jul 2011 |
67861-52151 |
| Toyota Yaris Mk2 / XP90 | 3 Door • France Built |
2006–2011 Jan 2006 – Jul 2011 |
67861-0D070 |
| Toyota Yaris Mk2 / XP90 | 5 Door • France Built |
2005–2011 Nov 2005 – Jul 2011 |
67861-0D050 |
✓ Toyota Yaris Mk2 / XP90 — 2006
✓ Toyota Yaris Mk2 / XP90 — 2007
✓ Toyota Yaris Mk2 / XP90 — 2008
✓ Toyota Yaris Mk2 / XP90 — 2009
✓ Toyota Yaris Mk2 / XP90 — 2010
✓ Toyota Yaris Mk2 / XP90 — 2011
✘ Left / nearside front door seal.
✘ Rear door weatherstrip.
✘ Window glass run channel.
✘ Outer window belt / scraper strip.
✘ Automatically interchangeable between every 3-door and 5-door Yaris.
✘ Suitable where your existing part number and shape do not match.
✅ BUYER FITMENT CHECKLIST
1. Confirm your vehicle is Toyota Yaris Mk2 / XP90.
2. Confirm whether your car is 3-door or 5-door.
3. Confirm you need the RIGHT / O/S FRONT door seal.
4. Compare the moulded corners and overall profile with the photographs.
5. Check the moulded part number on your existing weatherstrip.
6. Match your number with the compatibility chart above.
7. If unsure, contact us through eBay Messages before ordering.
SYMPTOMS OF A WORN OR DAMAGED DOOR SEAL
💨 Wind whistle or excessive air noise around the driver's door.
💧 Water entering or dampness after heavy rain.
🔎 Splits, cuts or visible deterioration in the rubber.
📉 Rubber permanently compressed or flattened.
📌 Seal pulling away from its retaining points.
🚗 Uneven compression when the door closes.
🧹 Excessive dust entering around the door aperture.
WHY BUY A FACTORY-FIT TOYOTA COMPONENT?
Vehicle-specific factory-fit weatherstrips are manufactured around the intended door profile, moulded corners and retaining locations.
Correct shape and compression are important because an incorrect or poorly matched seal can cause additional wind noise, difficult door closure or inadequate sealing.
Choosing a quality pre-owned factory-fit part can provide excellent value compared with purchasing the equivalent component new. Depending on the component and current new-part price, customers can potentially save significantly — in some cases up to approximately 70%.
🔧 FITTING INSTRUCTIONS
General fitting guidance only. If you are not confident carrying out the repair, use an experienced vehicle technician.
Nylon trim removal tool • trim clip tool • small pick • torch • microfibre cloth • mild cleaning solution • replacement clips if required
STEP 1 — Open the right-front door and inspect how the original seal is routed.
STEP 2 — Take photographs of the original installation before removing it.
STEP 3 — Compare the replacement seal's profile, moulded corners and retaining points with the original.
STEP 4 — Carefully release the old weatherstrip using a nylon trim tool rather than aggressively pulling the rubber.
STEP 5 — Clean the door's sealing surface and retaining locations.
STEP 6 — Align moulded corners and reference points before pressing the replacement weatherstrip into position.
STEP 7 — Install the remainder of the seal without stretching or twisting it.
STEP 8 — Confirm all retaining points are secure.
STEP 9 — Close the door carefully and check that the seal compresses evenly.
STEP 10 — Once installation is confirmed, carry out a controlled water test.
£ GARAGE LABOUR COST GUIDE
Static estimate based on approximately 30–45 minutes labour. No JavaScript or active calculator is used.
| Hourly Rate | 30 Minutes | 45 Minutes |
|---|---|---|
| £50/hour | £25.00 | £37.50 |
| £60/hour | £30.00 | £45.00 |
| £75/hour | £37.50 | £56.25 |
| £90/hour | £45.00 | £67.50 |
| £100/hour | £50.00 | £75.00 |
| £120/hour | £60.00 | £90.00 |
| £150/hour | £75.00 | £112.50 |
Estimates are illustrative only. Actual garage charges may vary.
ThePartPilot may be able to offer fitting or workshop assistance subject to availability. Please contact us through eBay Messages before purchasing if fitting is required.
🌍 UK & INTERNATIONAL DELIVERY
International shipping may be available through eBay's eligible global shipping services. Available countries, delivery prices, import charges and destination restrictions are shown by eBay during checkout.
Please ensure the delivery address shown during eBay checkout is correct before payment. We cannot manually change the delivery address after an order has been completed.
This item is sold under the applicable VAT Global Accounting / second-hand margin scheme. VAT is not separately itemised and no reclaimable VAT invoice is available.
RETURNS & CORRECT FITMENT
Our compatibility information is provided to help customers order the correct component first time.
Please verify the year, body style, location, build specification, existing part number and photographs before fitting the component.
If you are unsure about compatibility, contact us through eBay Messages before ordering and we will assist with the available fitment information.
THEPARTPILOT • 25,000+ PARTS IN STOCK
More than 25,000 vehicle parts held in stock at any one time.
Detailed compatibility information helps customers buy the correct component.
Fitting services may be available subject to workshop capacity.
Orders are prepared for dispatch with the aim of protecting the component in transit.
SUPPORT AN INDEPENDENT BUSINESS & KEEP GOOD PARTS IN CIRCULATION
Reusing serviceable vehicle components helps extend the useful life of existing parts and reduces unnecessary disposal.
When you buy from ThePartPilot, you are supporting an independent automotive parts business focused on supplying correctly identified components, detailed fitment information and customer support.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.