⚠ CRITICAL PART-NUMBER CHECK

The label visible on the photographed component reads 83950-0D100. Do not order from the vehicle registration year alone. Compare this complete number, the front icon arrangement, connector shape and retaining clips with the part removed from your vehicle.

TOYOTA YARIS XP130 FITMENT EDITION

Centre-dashboard hazard warning and safety-telltale panel, supplied exactly as shown in the item photographs.

ACTUAL ITEM PHOTOGRAPHS

Photographs form part of the description. Inspect them at full size for condition, finish, connector and mounting details.

ITEM DETAILS & SPECIFICS

✓ BUY THE CORRECT PART FIRST TIME

Before ordering, confirm every point below:

Compatibility assistance is available through eBay Messages. Send the chassis code, production month and a clear photograph of your existing panel and connector.

CATALOGUE-LISTED COMPATIBILITY

These are catalogue production windows for part number 83950-0D100. Vehicle equipment, destination market and production changes can still alter the fitted panel. The removed part number and physical layout remain the final checks.

Vehicle	Chassis code	Engine / fuel	Catalogue production window	Check
Toyota Yaris XP130	KSP130L / KSP130R	1.0 petrol, 1KR-FE	07/2014–06/2020	Match 0D100 and connector
Toyota Yaris Hybrid XP130	NHP130L / NHP130R	1.5 hybrid, 1NZ-FXE	07/2014–06/2020 Some equipment variants end earlier	Match telltale layout
Toyota Yaris XP130	NLP130L	1.4 diesel, 1ND-TV	07/2014–12/2018	Verify production month
Toyota Yaris XP130	NLP130R	1.4 diesel, 1ND-TV	07/2014–04/2018	Verify production month
Toyota Yaris XP130	NSP131L / NSP131R	1.5 petrol, 2NR-FKE	03/2017–06/2020 Some equipment variants end earlier	Match 0D100 and icons
Toyota Vitz XP130, selected Japanese application	NSP131	Equipment dependent	11/2017–04/2018	Number and connector essential

✕ DO NOT ASSUME THIS FITS

• XP130 vehicles produced before July 2014 unless the removed component independently matches 83950-0D100.
• Yaris XP90 / Mk2 models.
• Yaris XP210 / Mk4 models.
• XP150-market vehicles, Yaris saloons or unrelated Yaris body platforms.
• NSP130 1.33 petrol applications, which are not shown in the verified 83950-0D100 application data.
• Panels with a different number of telltales, different hazard-button shape, different connector or different retaining clips.
• A vehicle simply because it is registered between 2014 and 2020.

A registration lookup can narrow the search but cannot replace inspection of the original component.

FIVE-DOOR VEHICLE & DASHBOARD LOCATION REFERENCE

Reference photographs are commercially reusable CC0 images. They are included to explain vehicle type and installation area and are not photographs of the vehicle from which this particular component was removed.

WHAT THE PANEL DOES

The panel is positioned in the centre dashboard where the hazard button remains accessible to the driver and front passenger.

POSSIBLE FAULT SYMPTOMS

Similar symptoms can also be caused by a fuse, wiring, connector, body-control or supplemental-restraint fault. Diagnosis is recommended before replacing the panel.

WHY CHOOSE AN ORIGINAL MANUFACTURER-BUILT COMPONENT?

An original manufacturer-built panel was designed for the vehicle’s dashboard aperture, retaining clips, electrical connector, icon layout and illumination system. Compared with a low-cost pattern replacement, the correct factory-design component can provide:

✓ Correct mounting geometry and dashboard appearance.
✓ The intended connector orientation and locating guides.
✓ Consistent hazard-button travel and tactile operation.
✓ The correct safety-telltale symbols for the listed specification.
✓ Reduced risk of modification, loose fitment or mismatched illumination.

This is a pre-owned electrical component, so photographs, part-number matching and condition inspection remain essential. Savings compared with a new replacement vary by part, supplier and current market price; no fixed percentage saving is guaranteed.

GENERAL FITTING GUIDE

Safety warning: This panel is positioned beside safety-telltale equipment. Switch the ignition off, keep the key away from the vehicle, disconnect the negative 12-volt battery terminal and wait at least 90 seconds before disturbing the dashboard wiring. Never probe supplemental-restraint wiring or connectors.

Suggested tools: non-marring trim-removal tools, protective cloth, 10mm spanner or socket, small Phillips screwdriver where required, inspection light, gloves and a suitable diagnostic tool if a warning remains stored.

Estimated fitting time: approximately 20–45 minutes for an experienced technician, excluding diagnosis, damaged trim clips, coding or additional repairs.

Difficulty guide: 2/5 for a technician familiar with dashboard trim. Professional fitting is recommended when the vehicle has unresolved airbag or electrical warning faults.

ESTIMATED GARAGE LABOUR CALCULATOR

Static labour guide for a 20–45 minute installation. Multiply the garage’s hourly rate by the fraction of an hour required.

Garage hourly rate	20 minutes	30 minutes	45 minutes
£60 per hour	£20	£30	£45
£80 per hour	£27	£40	£60
£100 per hour	£33	£50	£75
£120 per hour	£40	£60	£90

Labour only. Estimates exclude diagnosis, parts, trim clips, programming, consumables, applicable garage taxes and additional repairs. Obtain a written quotation from the chosen workshop.

🔧

FITTING SERVICE SUBJECT TO AVAILABILITY

Workshop fitting may be available depending on technician capacity, vehicle condition and prior diagnosis. Contact us through eBay Messages before travelling or making arrangements.

DELIVERY & CHECKOUT ADDRESS

UK delivery: Available postage services, prices and estimated delivery dates are displayed in the eBay listing and at checkout.

International delivery: Available to eligible destinations through eBay’s current managed international shipping service. Destination eligibility, restrictions, import charges and final delivery cost are calculated by eBay at checkout.

Address warning: Check that the full delivery address shown during checkout is correct before payment. Orders must be dispatched to the address supplied by eBay, and the seller cannot manually redirect an order to a different address after purchase.

RETURNS & RESPONSIBLE FITMENT CHECKING

Returns are handled in accordance with the return terms shown on the eBay listing and the buyer’s applicable statutory rights. No automatic restocking percentage is charged.

Buyers should avoid fitting, modifying, opening or damaging a component until the number, connector and physical layout have been confirmed. Where legally permitted, a deduction may be considered only for actual loss of value caused by handling beyond what is reasonably necessary to inspect the item.

Selecting an incorrect “does not fit” or “not as described” reason does not alter the photographed part number or compatibility evidence. Contact us through eBay Messages first so the fitment information can be reviewed.

VAT INFORMATION

Sold under the second-hand margin/global accounting scheme. VAT is not separately itemised and no reclaimable VAT invoice is available for this item.

FROM OUR SHELF TO YOUR VEHICLE

♻️ 🌍 💚

SUPPORT A LOCAL SMALL BUSINESS & KEEP PARTS IN USE

Choosing a serviceable recycled component helps extend the productive life of an existing vehicle part, reduces demand for additional manufacturing and prevents reusable material from being discarded prematurely. Every order supports a specialist local automotive recycling business, our warehouse team and the work required to identify, store, photograph and dispatch the correct component.

FINAL CHECK BEFORE PURCHASE

Match 83950-0D100 • Match the front icons • Match the connector • Match the mounting clips • Confirm chassis code and production month