VAUXHALL AGILA B H08 2008 - 2014 FRONT RIGHT DRIVER INNER DOOR HANDLE
VAUXHALL AGILA B H08 2008 - 2014 FRONT RIGHT DRIVER INNER DOOR HANDLE
Premium Recycled Automotive Components • UK Stock
VAUXHALL AGILA B H08 2008 - 2014 08-14 FRONT RIGHT DRIVER INNER DOOR HANDLE
Front-right interior door-release handle assembly for the Vauxhall Agila B / Mk II (B) H08. Designed for the UK driver/offside front door position. This assembly mechanically operates the interior door-release mechanism when the pull handle is actuated.
Why Choose A Factory-Original Recycled Component?
A carefully selected factory-original donor component retains the original vehicle-specific geometry, fixing positions and operating layout it was designed around. Low-cost pattern alternatives can vary in moulding accuracy, handle feel, mounting alignment and finish.
Choosing a premium recycled component can also deliver substantial savings compared with purchasing an equivalent brand-new factory replacement.
*Maximum saving depends on the current comparable new-part price, specification and availability. Buyers should compare like-for-like pricing before purchase.
Item Details & Specifics
Actual Item Photographs
These are photographs of the component represented by this source listing. Please inspect the shape, fixing points, handle finish, locking tab and rear mechanism carefully before ordering.
Engineering / Part Number Verification
| Reference | Status |
|---|---|
| Manufacturer Part Number | Source listing records: Does Not Apply |
| Interchange Part Number | No confirmed interchange number verified from this item |
| Superseded Part Number | No confirmed superseded number verified from this item |
| Catalogue Research Reference | 93195905 / 47 10 604 is a catalogue candidate only. Do not rely upon it unless matched to the vehicle or original part. |
Vehicle Compatibility Guide
Exact listing range: 2008 - 2014 (08-14)
| Vehicle | Years | Chassis | Compatible Engine Families Shown By eBay |
|---|---|---|---|
| Vauxhall Agila B Hatchback | 2008 - 2014 | Mk II (B) H08 / FWD | 1.0 K10B |
| Vauxhall Agila B Hatchback | 2008 - 2014 | Mk II (B) H08 / FWD | 1.2 K12B |
| Vauxhall Agila B Hatchback | 2008 - 2014 | Mk II (B) H08 / FWD | 1.3 CDTi D13A / Z13DTJ |
Engine information is provided as a vehicle-identification aid. This interior door-handle assembly is principally matched by generation, body, door position, physical design and part reference.
Technical Mounting Reference
The assembly sits behind/within the front-right interior door-trim handle area and interfaces with the mechanical door-release linkage. Pulling the silver handle transfers movement into the door-latch release mechanism.
Will Not Fit / Do Not Assume Compatibility
Agila A / Mk I H00 Left / Passenger Side Exterior Door Handle Unverified Cross-Platform Applications
This listing is for a front-right inner handle. Do not assume that a rear handle, left-hand handle, earlier Agila A component, exterior handle or similar-looking Suzuki-family component is interchangeable unless the physical design and verified reference information agree.
Buyer Matching Checklist
| Check | Required Match |
|---|---|
| Vehicle Generation | Agila B / Mk II (B) H08 |
| Model Years | 2008 - 2014 |
| Door | Front Right |
| UK Side | Driver / Offside |
| Handle Appearance | Silver pull lever, black carrier, red lock indicator |
| Rear Housing | Compare mounting tabs, mechanism and fixing points to photos |
| Part Number | Match your original stamped/moulded reference where available |
Installation Overview
Professional fitting is recommended. Exact fasteners and trim-release procedure can differ by specification, so always confirm the correct workshop procedure for the vehicle.
Park safely, remove the key and isolate the battery where the vehicle-specific trim procedure requires electrical disconnection.
Locate the concealed trim screws/fasteners and release the door-card clips carefully using a non-marring trim tool.
Move the trim sufficiently to reach the handle carrier and release linkage without damaging the moisture barrier or surrounding trim.
Note the original routing/orientation, then carefully disconnect the applicable rod, cable or linkage from the old handle assembly.
Fit the replacement in the same orientation and reconnect the release mechanism securely.
Confirm interior release and lock operation before fully reinstalling the door trim.
Refit all clips, screws, covers and seals using the correct manufacturer procedure.
Typical Tools:
Non-marring trim-removal tools, suitable screwdriver/Torx bits, small socket set, pick or small pliers, work light and protective gloves.
Actual time depends on vehicle condition, trim fasteners and technician experience. This is an interior handle replacement — a 4.5-hour gearbox-style labour allowance would not be appropriate for this item.
Illustrative Garage Labour Matrix
The matrix below uses a conservative 1.0-hour planning allowance. It is a simple comparison aid only and is not a quotation.
| Estimated Labour | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 1.0 hour | £40 | £60 | £80 | £100 |
Fitting may be available directly through our repair facility, subject to workshop availability. Please contact us through eBay Messages before making arrangements.
Delivery & International Shipping
Postage is not advertised as free in this description. Applicable shipping charges are calculated/displayed by eBay at checkout according to destination and the listing's active postage settings.
UK orders are dispatched using the domestic service selected in the listing. Eligible international orders may be processed through eBay's Global Shipping Programme where available at checkout, including destinations across Europe, the USA, Canada, Australia and other supported regions.
Returns & Correct-Part Verification
Buyers are strongly encouraged to compare the high-resolution item photographs, physical mounting points, side and any available stamped/moulded references with the original component before ordering. Automated vehicle compatibility should be treated as an additional guide rather than the only matching method.
Incorrectly ordered or change-of-mind returns must be returned in the same condition in which they were supplied, complete with all included components. Where eBay permits a deduction and a returned item has suffered an actual loss in value because of use, damage, missing parts or handling beyond what is necessary to inspect it, an appropriate deduction may be made to reflect that loss in value, up to the amount permitted by eBay policy.
VAT Margin Scheme
This qualifying recycled component is sold under the applicable Global Accounting VAT Margin Scheme for second-hand goods. VAT is not separately itemised and no separately reclaimable VAT amount is shown on the sales invoice.
How To Find Us / Customer Support
For fitment questions, photographs or order support, please message our team directly through eBay Messages.
Our registered business contact information is displayed by eBay within the seller's Business Details / Business Seller Information area.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.