Vauxhall Combo C Mk2 1.7 CDTI Z17DTH Engine Bay Fuse Relay Box Delphi Loom

Vauxhall Combo C Mk2 1.7 CDTI Z17DTH Engine Bay Fuse Relay Box Delphi Loom

£28.63
Skip to product information
Vauxhall Combo C Mk2 1.7 CDTI Z17DTH Engine Bay Fuse Relay Box Delphi Loom

Vauxhall Combo C Mk2 1.7 CDTI Z17DTH Engine Bay Fuse Relay Box Delphi Loom

£28.63
THEPARTPILOT
VAUXHALL COMBO C / MK2 1.7 CDTI
ENGINE-BAY FUSE / RELAY BOX + ATTACHED WIRING LOOM
Item 147493783026  •  GM / DELPHI markings visible  •  Fitment-first listing
IMPORTANT: MATCH YOUR ORIGINAL BOX, CONNECTORS, LOOM ROUTING AND MOUNTING POINTS BEFORE ORDERING
What the photographs confirm

This is an engine-bay fuse / relay distribution box assembly with attached wiring loom. The housing visibly carries GM and DELPHI moulded markings. The handwritten dismantling note reads “Combo 53 / 1.7 CDTI / Fuse Box”.

Critical fitment point: a unique service part number is not readable in the current photographs. We will not invent a number or claim a blanket year range for this individual unit. Compare your original part carefully and message us through eBay with clear photos / numbers if unsure.

Vauxhall Combo C Mk2 1.7 CDTI Delphi engine bay fuse relay box wiring loom
THEPARTPILOT
REFERENCE 1 • GM / DELPHI housing, loom and yellow connector
Vauxhall Combo 53 1.7 CDTI fuse box donor marking reference
THEPARTPILOT
REFERENCE 2 • donor dismantling marking shown clearly
Vauxhall Combo fuse box connector mounting and loom reference
THEPARTPILOT
REFERENCE 3 • rear housing, mounts, wiring exits and connector geometry
Item details & engineering references
Vehicle application shown Vauxhall Combo C / Mk2 family
Engine marking 1.7 CDTI; Vauxhall engine reference Z17DTH, 1686cc, 74kW
Part type Engine-bay fuse / relay distribution box with attached wiring loom
Manufacturer markings GM and DELPHI moulded into housing
Manufacturer Part Number Not readable / not verified from the supplied listing photographs
Interchange Part Number No confirmed interchange number from current evidence
Superseded Part Number No confirmed superseded number from current evidence
Placement Under bonnet / engine compartment, next to the coolant expansion tank on the Combo C layout
Visible colour marking Black housing; distinctive yellow connector; black / purple connector and multicolour loom visible
Visible construction Moulded engineering-plastic electrical housing, metal terminals and insulated wiring; exact resin grade is not verified
Body / door configuration Not independently verified from the current part photographs; do not use door count alone to identify this electrical unit
Seller warranty 30 days, as shown on the current eBay listing
eBay Item Number 147493783026
PARTS COMPATIBILITY • FITMENT FIRST

The model / engine range below is a reference for buyer identification. Because the unique service number on this individual box is not readable, it is not a blanket promise that every vehicle in the reference range uses this exact electrical unit.

Make / Model Engine Reference range Status for this exact unit
Vauxhall Combo C / Mk2 1.7 CDTI 16V • Z17DTH • 1686cc 2004–2011 model / engine catalogue reference POTENTIAL MATCH — exact box must be photo / connector / number matched
Other vehicles / cross-model applications NONE CONFIRMED from current evidence — no guessed cross-fitment
About the “53” donor marking

If “53” refers to the UK registration age identifier, that identifier spans September 2003 to February 2004. It is useful donor evidence, but it is not an exact fitment year range for the fuse box. Do not buy solely because your van is on a 53 registration.

Do NOT order this unit solely for any of the following
✖ Combo C 1.3 CDTI variants — a different engine/fuse-box layout is documented.
✖ Petrol Combo C variants, or 1.7 DTI / DI variants, unless your original unit is an exact visual / connector / service-number match.
✖ Later-generation Combo D or Combo E vehicles.
✖ Corsa, Tigra, Meriva, Astra or any other GM-family vehicle unless an exact service-number and full connector / mounting match has been independently confirmed.
✖ Any vehicle whose original box has different plugs, fuse / relay layout, loom exits, yellow connector, mounting tabs or housing shape.
5-point buyer matching checklist
1. Compare the complete housing shape from the top, rear and sides.
2. Match every connector colour, locking tab, terminal layout and the distinctive yellow plug.
3. Match the mounting points and the exact direction / number of loom branches.
4. Compare the fuse / relay arrangement and any labels or service numbers on your original box.
5. If anything differs, do not order yet — send clear original-unit photos, vehicle registration / VIN and any readable numbers through eBay Messages for fitment help.
Where it is fitted

On the Combo C layout, the engine-compartment fuse box is positioned next to the coolant expansion tank. The diagram below is an original static location guide rather than a third-party vehicle photograph.

UNDER-BONNET LOCATION REFERENCE • FRONT OF VEHICLE ↓
COOLANT
EXPANSION TANK
FUSE / RELAY BOX
NEXT TO EXPANSION TANK
What this part does

The engine-bay fuse / relay box distributes electrical power and protects multiple circuits. Depending on vehicle specification, protected or supplied systems can include engine control, starter, fuel-injection / fuel-pump circuits, instruments, horn, wipers, lighting, cooling-related circuits and other body-electrical consumers.

Important: circuit allocation varies by engine and equipment. A blown fuse or electrical fault should be diagnosed before replacing the box; the root cause may be a downstream short, damaged wiring, poor earth, relay, battery / charging issue or another component.

Possible symptoms of a faulty fuse / relay box or damaged connections
⚡ Intermittent loss of electrical circuits or accessories 🚐 No-crank / non-start symptoms where a relevant feed or relay circuit is affected
💡 Unexplained lighting, wiper, fan or control-system faults 🔥 Heat damage, discoloured terminals, burning smell or melted connector areas
💧 Corrosion / moisture ingress causing voltage drop or intermittent contact 🧰 Repeated fuse failure — investigate the underlying circuit before replacing fuses or the box
Why choose a manufacturer-marked original vehicle-fit unit?

A correctly matched GM / Delphi unit keeps the connector geometry, mounting design, loom routing and fuse / relay architecture intended for the vehicle specification. That can reduce installation problems associated with low-cost pattern alternatives that do not reproduce every detail correctly.

Recycled original vehicle-fit parts can also offer substantial value compared with new-equivalent pricing. Depending on the component and current market price, savings may reach up to around 70%; actual savings vary and are not guaranteed.

Fitting guide
1. Switch the ignition fully off, remove the key and disconnect the battery negative terminal. Preserve radio/security settings where applicable.
2. Photograph and label the original fuse / relay positions, plugs, loom branches and routing before removal.
3. Release connector locks carefully. Remove mounting fixings and the original assembly without pulling on the wiring.
4. Transfer only the required serviceable fuses / relays where appropriate, keeping ratings and positions exactly correct.
5. Install the replacement assembly without forcing connectors. Make sure every lock is fully seated and the loom is routed away from heat, sharp edges and moving parts.
6. Tighten mounting hardware to the vehicle-maker specification; no unverified torque values are quoted here.
7. Reconnect the battery, carry out a full electrical function test and scan for stored fault codes if appropriate.

Electrical safety: this is a guide, not a workshop-manual procedure. Professional diagnosis / installation is recommended, especially where wiring damage, overheating or repeated fuse failure is present.

Typical tools
• Battery-terminal spanner / socket (commonly 10mm)
• Socket and ratchet set
• Small trim / electrical pick tools
• Fuse puller
• Torch and labelling tape
• Multimeter
• Diagnostic scan tool where required
Guide repair time
0.75–1.5 HOURS
Guide estimate for a straightforward accessible swap by an experienced technician. Diagnosis, seized fixings, damaged connectors, loom routing or variant differences can increase time.
Static garage labour-cost calculator

Estimated labour cost = garage hourly rate × time. Parts, VAT, diagnostics, consumables and additional repairs are not included.

Garage rate 0.75 hr 1.0 hr 1.5 hr
£50/hr £37.50 £50.00 £75.00
£70/hr £52.50 £70.00 £105.00
£90/hr £67.50 £90.00 £135.00
£110/hr £82.50 £110.00 £165.00
£130/hr £97.50 £130.00 £195.00
£150/hr £112.50 £150.00 £225.00
Fitting service: ThePartPilot may be able to provide fitting subject to availability. Please message us through eBay before purchase to check.
What is included
Fuse / relay box housing with the attached loom and connectors shown in the listing photographs. Please treat the photographs as the definitive guide to plugs, wiring branches, mounting points and included loose / fitted components.
25,000+ PARTS IN STOCK & ON THE SHELF
📦
Large stocked range
🔎
Fitment-first checks
🔧
Repair support available
🚚
Careful dispatch preparation

Our parts are prepared for resale and photographed so buyers can compare the exact item. Testing capability varies by component; rely on the listing condition, photos and stated warranty for this item.

International delivery through eBay Global Shipping Programme

Where this item and destination are eligible, eBay currently supports GSP delivery from the UK to the following destinations. Availability, import charges, restrictions and final delivery options are controlled by eBay and shown at checkout.

EU: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

Non-EU: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA, Vietnam.
Delivery-address check

Please make sure the delivery address shown on your eBay order is correct before completing checkout. We dispatch to the address supplied with the eBay order and cannot manually substitute a different delivery address after purchase.

Returns & fitment responsibility

Please complete the fitment checks above before installation. Returns should come back as the same item, complete and in the same condition as received.

If an item is returned installed, altered, incomplete or damaged beyond what is necessary for reasonable inspection, an appropriate deduction may be made for the actual loss in value, up to 50% where eBay permits and the seller qualifies. This is not a fixed restocking charge and does not reduce statutory rights where an item is faulty or materially not as described. Please use an accurate eBay return reason.

VAT • Global Accounting Scheme

Where this recycled part is eligible for HMRC Global Accounting, VAT is accounted for within the margin scheme and is not separately itemised or reclaimable on the item price. A Global Accounting invoice statement is used where applicable.

NEED FITMENT HELP?
Message ThePartPilot through eBay before ordering with your VIN / registration, clear photos of your original unit and every readable number. We would rather verify first than have you order the wrong part.
📦 PICK • PROTECT • PACK • DISPATCH 🚚

Parts are stored on the shelf, selected against the listing, protected for transit and prepared for dispatch. Packaging method is chosen to suit the component and help it arrive securely.

♻️ SUPPORT A LOCAL SMALL BUSINESS • KEEP GOOD PARTS IN USE 🌍

Choosing a serviceable recycled vehicle part keeps a usable component in circulation for longer and can reduce demand for new materials and replacement manufacturing compared with discarding it. Exact environmental savings vary by part and supply chain, but reuse is a practical way to get more life from components that already exist. Thank you for supporting ThePartPilot.

WhatsApp QR for Fitment Help / Appointment Enquiries 

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.       
      
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.  
THEPARTPILOT • FITMENT-FIRST VEHICLE PARTS • 25,000+ PARTS IN STOCK • ITEM 147493783026

You may also like