Vauxhall Opel Agila B H08 2008-2014 Front Left Interior Door Handle 93195908
Vauxhall Opel Agila B H08 2008-2014 Front Left Interior Door Handle 93195908
VAUXHALL / OPEL AGILA B H08
2008-2014 •
FRONT LEFT / NSF INTERIOR DOOR RELEASE HANDLE
The supplied photographs identify this component as an Agila front-left / nearside-front handle. The catalogue number above has been cross-referenced for that application; however, the number 93195908 is not visibly stamped on the supplied photographed handle. Always compare your original component, mounting points, side and VIN.
ACTUAL COMPONENT PHOTOGRAPH
Actual source-listing component image. Please inspect the shape, lever profile, colour, fixing arrangement and condition carefully.
WE CHECK MORE THAN THE LISTING TITLE
Rear photograph: breaker identification visibly indicates AGILA, 2010 and NSF.
Rear construction photograph: ABS material marking and spring/mechanical elements are visible.
AGILA B / H08 • 5-DOOR • 2008-2014
Vehicle reference from the source listing. Use this image as a generation/body-style reference only. Registration year by itself is not sufficient to confirm an individual component.
ITEM DETAILS & ENGINEERING REFERENCE
| Vehicle | Vauxhall / Opel Agila B |
|---|---|
| Chassis / Platform | H08 |
| Body | 5-Door Hatchback |
| Fitment Years | 2008-2014 / 08-14 |
| Component | Interior Door Release Handle / Inner Door Lock Remote-Control Handle |
| Placement | Front Left / Nearside Front / NSF / UK Passenger Side |
| Catalogue MPN | 93195908 |
| Additional Catalogue Reference | 47 10 607 / 4710607 |
| Interchange Number | No additional independent interchange number verified |
| Superseded Number | No confirmed superseded number verified |
| Material | ABS moulded housing with metal return-spring hardware |
| Colour / Finish | Grey/Silver lever with textured Black housing |
| Universal Fitment | No |
| Quantity | 1 handle assembly – exactly as pictured |
MECHANICAL FUNCTION & STRUCTURAL LOCATION
This handle sits on the inside of the front-left door and forms part of the mechanical interior door-release system. Pulling the lever transfers movement through the door's operating linkage to the latch, allowing the occupant to release and open the door from inside the vehicle.
The housing provides the mounting geometry and pivot support for the release lever. Correct pivot alignment, mounting shape and linkage attachment are therefore important for smooth lever travel and reliable latch release.
PHYSICAL MOUNTING LOCATION
Technical-location placeholder: component mounts within the front-left interior door trim area and connects to the door-latch operating linkage. Replace this placeholder with your own photographed door-card/location diagram when available.
VERIFIED FITMENT GUIDE
| Make | Model / Chassis | Years | Door / Side |
|---|---|---|---|
| Vauxhall | Agila B / H08 • 5-Door | 2008-2014 08-14 |
Front Left / NSF / UK Passenger |
| Opel | Agila B / H08 • 5-Door | 2008-2014 08-14 |
Front Left |
Compatibility should still be confirmed from VIN/build specification, your existing handle, side, linkage position, mounting pattern and the high-resolution photographs above. A registration year can overlap production or first-registration dates.
WILL NOT FIT / EXCLUSION LIST
- Agila A / first-generation models.
- Right-front / UK driver's-side applications.
- Vehicles with a different handle housing, linkage attachment or mounting arrangement.
- Any application where the existing component does not visually match the supplied photographs.
- Vehicles identified only by registration year where the actual build specification differs.
- Applications relying solely on an automated compatibility suggestion without physical verification.
Similar-looking handles can differ by side, pivot arrangement, trim colour, fixing position and linkage design.
5-POINT MATCHING CHECK
- Vehicle: confirm Agila B / H08 generation.
- Year: confirm the vehicle falls within the supported 2008-2014 generation.
- Side: confirm Front Left / NSF / UK passenger side.
- Physical Match: compare lever, housing, pivots, mounting holes and linkage attachment to every photograph.
- Number/VIN: compare any readable code on your original part and use the vehicle VIN where uncertainty remains.
FACTORY-MADE FIT • PROVEN GEOMETRY • SMARTER VALUE
Correct Mounting Geometry
A matching factory-produced component retains the original mounting dimensions, pivot position and linkage geometry that the vehicle was engineered around.
Known Vehicle-Grade Construction
Low-cost reproductions can vary in plastic thickness, pivot feel, spring specification, clip engagement and surface finish. Reusing the correctly matched factory component avoids introducing an unverified redesign into the repair.
SAVE UP TO 70% ON SELECTED USED FACTORY COMPONENTS
Compared with equivalent brand-new replacement pricing on selected parts. Actual saving varies by component, availability and current market price.
OVER 25,000 PARTS ON THE SHELVES
Illustrative automotive-parts warehouse stock photograph; not a photograph of THEPARTPILOT premises.
With more than 25,000 automotive components held on the shelves, THEPARTPILOT is built around fast part identification, careful inspection, secure storage and dependable dispatch.
FITTING GUIDE
Recommended Tools
- Plastic trim-removal wedges
- Suitable Torx / cross-head bits for your vehicle's installed fasteners
- Small pick or plastic clip-release tool
- Small ratchet/socket set where applicable
- Magnetic parts tray
- Low-tack protective tape for adjacent trim
- Replacement door-card clips if existing clips are brittle or damaged
Lower the window, switch the ignition off and protect adjacent trim.
Remove the relevant trim caps, pull-handle screws and door-card fasteners using the correct tool to minimise cosmetic damage.
Work around the perimeter with a plastic trim tool, release the retaining clips and carefully lift the panel from its upper mounting.
Disconnect relevant electrical plugs from the door card where necessary and move the moisture barrier only as much as required.
Photograph the existing linkage before removal. Release the retaining clip and disconnect the operating rod/linkage from the handle.
Remove its retaining fastener(s) and withdraw the handle without forcing the surrounding trim.
Place both parts side-by-side and confirm side, housing dimensions, pivot position, linkage point and mounting features match.
Reconnect the operating linkage, secure the handle, refit electrical connectors/barrier/door card, then verify the interior handle, exterior release, latch, central locking and window functions before final use.
WORKSHOP FITTING SUPPORT
Illustrative workshop image; not THEPARTPILOT premises.
Professional fitting support may be available subject to workshop capacity. Please enquire using eBay Messages. Any service arrangement must follow the transaction and communication options permitted by eBay.
ILLUSTRATIVE GARAGE LABOUR MATRIX
Using a 45-minute / 0.75-hour reference job time, the following hardcoded examples show labour-only cost at different garage hourly rates.
| Reference Time | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 0.75 hr / 45 min | £30.00 | £45.00 | £60.00 | £75.00 |
Illustration only. Garage charges vary by region and workshop. Figures exclude the part, diagnostics, additional damaged components, replacement clips, consumables and any applicable tax.
DELIVERY & INTERNATIONAL SHIPPING
UK Delivery
Postage is not free. Buyers pay the delivery charge shown or calculated by eBay at checkout for the selected destination/service.
International Delivery
International shipping is available where eBay presents an eligible Global Shipping Programme option at checkout, including many destinations across Europe, the USA, Canada, Australia and other supported regions. Availability and final charges are determined by the destination and eBay checkout.
CAREFULLY PACKED FOR DISPATCH
Illustrative public-domain dispatch stock photograph; not THEPARTPILOT premises and no affiliation with any pictured carrier is implied.
Interior trim parts are packed to reduce movement and protect vulnerable pivots, levers and mounting areas during normal parcel handling.
RETURNS, FITMENT RESPONSIBILITY & CONDITION
Returns are handled in accordance with the returns policy displayed on this eBay listing, eBay requirements and applicable statutory consumer rights.
A change of mind or ordering the wrong variant does not automatically create a fixed restocking penalty. Where an item is returned used, altered, damaged, incomplete or otherwise in a materially different condition, any permitted deduction will be limited to the actual reduction in value and applied only where eBay policy and applicable law permit it.
VAT MARGIN-SCHEME INFORMATION
Where this sale is accounted for under the Global Accounting VAT Margin Scheme for eligible second-hand goods, VAT is not separately itemised and no separately reclaimable VAT amount is shown on the invoice.
Tax treatment may differ where eBay or another legally responsible party is required to collect or account for tax on a transaction.
HOW TO FIND US / CUSTOMER SUPPORT
Please use eBay Messages for pre-sale fitment questions and after-sale support.
Our complete business contact information and physical address are displayed by eBay in the applicable Business Seller Information / Business Details area.
A SMARTER CHOICE FOR YOUR CAR & THE ENVIRONMENT ♻️
Giving a high-quality serviceable vehicle component another working life helps reduce unnecessary demand for newly manufactured replacements, keeps usable automotive material in circulation and reduces avoidable waste. Choosing carefully matched recycled parts also supports skilled local UK automotive businesses and helps keep more vehicles economically repairable. 🚗🔧♻️
Thank you for choosing THEPARTPILOT and supporting a practical repair-and-reuse approach to motoring. 💚
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.