Vauxhall Zafira B 1.7 CDTi 2008-2015 Front Left Brake Caliper 93176426 A17DTR
Vauxhall Zafira B 1.7 CDTi 2008-2015 Front Left Brake Caliper 93176426 A17DTR
VAUXHALL ZAFIRA B 1.7 CDTi
FRONT LEFT BRAKE CALIPER
Please compare the photographs, position, brake system and part number before ordering. If you are uncertain, send us your full 17-character VIN before purchase and we can verify the application.
| Part | Front Brake Caliper |
| Vehicle Position | FRONT LEFT / UK PASSENGER SIDE |
| Verified Reference | 93176426 |
| Cross Reference | 93190644 |
| Brake System | ATE application |
| Caliper Type | Single-piston floating caliper application |
| Piston Diameter | 57 mm application |
| Disc Application | 25 mm ventilated front disc application |
| Condition | Used – expect normal cosmetic signs associated with a previously fitted vehicle component |
REFERENCE VEHICLE
Reference photograph showing the Zafira B / A05 5-door MPV body generation. This photograph is provided to help identify the vehicle generation and is not a photograph of the donor vehicle.
Vehicle reference image: M 93 / Wikimedia Commons – CC BY-SA 3.0 DE.
CONFIRMED APPLICATION
| Make | Model | Years | Engine | Power | Chassis |
|---|---|---|---|---|---|
| Vauxhall / Opel | Zafira B / Zafira Family B | 01/2008–04/2015 | 1.7 CDTi A17DTR | 92kW / 125PS | A05 / M75 |
Zafira B A05 • 5-door MPV • 1.7 CDTi • A17DTR • 1686cc • 92kW / 125PS.
Zafira Tourer C, Zafira A, different brake packages, opposite-side calipers, or another engine/model merely because the caliper appears visually similar.
Other GM/Vauxhall/Opel vehicles can cross-reference the same number, but they are not being represented here as confirmed fitment without VIN verification.
WHERE IS THIS PART FITTED?
This caliper is fitted at the front-left wheel. On a UK right-hand-drive Zafira this is normally described as the front passenger-side / near-side front.
The caliper forms a critical part of the hydraulic braking system. When the brake pedal is pressed, hydraulic pressure acts on the caliper piston. The caliper applies the brake pads against the rotating brake disc, converting the vehicle's kinetic energy into heat and slowing the wheel.
Because the component directly controls braking force at one front wheel, correct side, piston specification, mounting arrangement and brake-system application are essential.
POSSIBLE SIGNS OF A FAILING CALIPER
- Vehicle pulling to one side during braking
- One front wheel becoming unusually hot
- Burning smell after driving
- Uneven or accelerated brake-pad wear
- Brake binding or wheel resistance
- Reduced braking efficiency
- Brake-fluid leakage around the caliper
- Corroded or seized piston
- Sticking slider mechanism
- Abnormal braking noise
WHY BUY A USED ORIGINAL-EQUIPMENT PART?
| Used Original-Equipment Component | Low-Cost Pattern Alternative |
|---|---|
| Produced for the vehicle manufacturer's specified application | Specification and manufacturing quality can vary by manufacturer |
| Known mounting geometry when reference is correctly matched | Aftermarket interpretation of original specification |
| Reuses an existing serviceable component | Requires manufacture of another replacement component |
| Can offer substantial savings compared with buying the equivalent component new | Price and quality vary substantially |
Used vehicle components can in some cases save up to approximately 70% compared with purchasing new, depending on the component and current new-part price.
FITTING OVERVIEW
The following is a general workshop overview, not a substitute for the manufacturer's repair procedure.
- Secure the vehicle on level ground and loosen the appropriate wheel fasteners.
- Raise the vehicle at the specified lifting point and support it safely with approved axle stands or workshop lift.
- Remove the front-left wheel.
- Inspect the brake hose, disc, pads and surrounding components.
- Remove the existing caliper using the manufacturer's prescribed procedure.
- Prevent uncontrolled brake-fluid loss and never allow the flexible brake hose to support the caliper's weight.
- Install the replacement caliper and associated hardware as specified by the vehicle manufacturer.
- Torque all fasteners to the correct vehicle-specific specification.
- Bleed the hydraulic braking system using the correct brake fluid and procedure.
- Check carefully for hydraulic leaks.
- Reinstall the wheel and torque wheel fasteners to manufacturer specification.
- Confirm a firm brake pedal before moving the vehicle.
- Carry out a controlled brake-function test before normal road use.
Typical Workshop Equipment
Workshop lift or jack and axle stands • wheel-removal tools • suitable socket/spanner set • torque wrench • brake hose/line tools where required • piston/caliper tools • brake bleeding equipment • approved brake cleaner • correct specification brake fluid • appropriate PPE.
GARAGE LABOUR COST ESTIMATOR
No JavaScript is used, so the table below provides an instant manual estimate.
| Garage Rate | 1 Hour | 1.5 Hours | 2 Hours |
|---|---|---|---|
| £50/hour | £50 | £75 | £100 |
| £60/hour | £60 | £90 | £120 |
| £70/hour | £70 | £105 | £140 |
| £80/hour | £80 | £120 | £160 |
| £90/hour | £90 | £135 | £180 |
| £100/hour | £100 | £150 | £200 |
| £120/hour | £120 | £180 | £240 |
THEPARTPILOT fitting service may also be available – subject to workshop availability and prior arrangement.
BUY THE CORRECT PART FIRST TIME
SEND US YOUR FULL 17-DIGIT VIN
We can compare the vehicle specification against the available part information before purchase.
Do not rely solely on registration year. Manufacturers can change brake specifications during a model's production life. Matching the stamped/cast reference on your existing component and VIN-based vehicle specification is the safest method.
UK & INTERNATIONAL DELIVERY
International delivery is offered through eBay's Global Shipping Programme / applicable eBay international shipping service where the item and destination are eligible. eBay calculates international carriage, customs and applicable import charges at checkout.
GSP currently covers eligible destinations across Europe and numerous international markets including the USA, Canada, Australia, New Zealand, Japan, South Korea, UAE, Saudi Arabia, Qatar, Singapore, Malaysia, Hong Kong, Taiwan, Brazil, Mexico, South Africa and many more.
Please ensure your delivery address is completely correct before checkout. For transaction security and carrier requirements, we cannot simply redirect an order to a different address after checkout. If an address is incorrect, contact us through eBay before dispatch for the available options.
This used part is sold under the applicable margin scheme where stated. VAT is not separately reclaimable or itemised on the selling price.
COLLECTION AVAILABLE
Collections available 7 days a week until 8PM by prior appointment, including Bank Holidays where arranged in advance.
Please arrange your collection before travelling so that the component can be located and prepared.
Scan the QR code to start a WhatsApp conversation.
RETURNS & FITMENT RESPONSIBILITY
Please inspect the listing photographs and compatibility information carefully before ordering. If uncertain, contact us before purchase with your VIN and existing part reference.
Returns are handled in accordance with the return terms displayed on the eBay listing and applicable eBay policies. Components returned should be complete and in the condition required by the applicable return terms.
Where a buyer reports an incorrect-fit issue, supplying the VIN and photographs/reference from the original component will help us investigate the application quickly.
25,000+ PARTS IN STOCK
THEPARTPILOT carries more than 25,000 vehicle components in stock and on the shelf at any one time, covering mechanical, electrical, interior, exterior and body components.
MORE THAN JUST PARTS
Subject to availability and prior booking.
Cash purchase service with nationwide collection and same-day payment where agreed.
Parts carefully prepared for courier collection.
SUPPORT A SMALL BUSINESS & REUSE QUALITY CAR PARTS
Buying a reusable vehicle component supports an independent UK automotive business while keeping a serviceable part in circulation. Reusing suitable components reduces unnecessary waste and can reduce demand for the raw materials, energy, manufacturing and transport involved in producing a brand-new replacement.
Better value • Less waste • More parts reused ♻️
Parts • Fitment Support • Collection • Fitting • Vehicle Purchasing