VW Golf MK5 Passat B6 Caddy Jetta Audi A3 Battery Cover Lid 1K0915443C
VW Golf MK5 Passat B6 Caddy Jetta Audi A3 Battery Cover Lid 1K0915443C
VW GROUP HARD PLASTIC BATTERY COVER / BATTERY BOX LID
Upload an HTTPS image showing professionally organised automotive parts shelving
THE PART
This listing is for a hard-plastic battery cover / battery box lid carrying the identifying part number 1K0915443C / 1K0 915 443 C.
The component is located within the vehicle's engine-bay battery installation. Its purpose is principally protective and structural: it forms part of the battery enclosure and helps shield the battery installation from routine engine-bay contamination and contact.
Factory-produced used components provide the material specification, moulding geometry, mounting points and engine-bay packaging intended for the relevant vehicle configuration. Cheap pattern copies may differ in plastic thickness, clip geometry, dimensional accuracy and finish.
Buying a quality recycled factory component can also represent a substantial saving compared with purchasing the corresponding component brand new.
IDENTIFICATION DATA
| Attribute | Listing Information |
|---|---|
| Component | Battery Cover / Battery Box Lid |
| Primary Part Number | 1K0915443C |
| Spaced Number | 1K0 915 443 C |
| Brand | Volkswagen |
| Material | Hard moulded plastic |
| Location | Engine bay — battery installation |
| Condition | Used |
COMPATIBILITY — READ BEFORE ORDERING
The source listing associates this component with applications including:
These model references do NOT mean the component fits every engine, production date, trim or derivative within those ranges. Vehicle parts catalogues show production/VIN restrictions for 1K0915443C on some applications.
THEPARTPILOT Fitment Rule
Before purchasing, compare 1K0915443C / 1K0 915 443 C against the number moulded/stamped on your existing component and compare all mounting points, clips, profile and dimensions with the listing photographs.
For VIN-dependent applications, obtain a VIN-specific parts catalogue check before ordering.
3-DOOR / 5-DOOR & BODY VARIANT WARNING
Insert licensed silhouettes here where the donor/application is verified
Do not assume 3-door, 5-door, hatchback, saloon, estate, van or facelift variants use an identical component simply because the vehicle shares a model name.
For this battery cover, the stamped/moulded part number and VIN-specific catalogue application take priority over body-style assumptions.
WILL NOT FIT / EXCLUSION LIST
Do not order this item where:
- Your existing cover carries a different non-interchangeable part number.
- The battery enclosure, clips or mounting profile differ from the photographs.
- Your VIN-specific catalogue specifies another cover revision.
- The vehicle merely looks similar but belongs to a different platform/generation.
- A facelift or production change introduced a different battery enclosure.
TECHNICAL MOUNTING REFERENCE
Insert an HTTPS reference image showing the battery enclosure location in the engine bay
Typical physical location: engine compartment, directly at the vehicle battery enclosure. Exact orientation varies by vehicle configuration.
FITTING GUIDE
This component is normally a straightforward mechanical trim/enclosure replacement, but the precise retention arrangement varies by application.
Suggested Tools
- Protective gloves
- Trim removal tool
- Small flat trim tool where appropriate
- Torch / inspection light
- Basic socket set only if surrounding trim obstructs access
General Installation Procedure
- Switch the vehicle off, remove the key and allow the engine bay to cool.
- Open the bonnet and identify the battery enclosure.
- Inspect how the existing cover is retained before applying force.
- Release the original cover's clips/tabs carefully.
- Compare the removed component directly with 1K0915443C.
- Check all locating tabs and retention points before installation.
- Position the replacement without forcing or bending the plastic.
- Engage each factory retention point evenly.
- Confirm the cover is stable and cannot contact moving/hot components.
ESTIMATED LABOUR COST
For a straightforward accessible battery-cover replacement, allow approximately 0.25 hour / 15 minutes. Additional surrounding trim or unusual vehicle configuration can increase workshop time.
| Estimated Time | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 0.25 hr | £10 | £15 | £20 | £25 |
Illustrative labour calculation only. Actual workshop charges, minimum labour increments and additional work vary.
WHY BUY RECYCLED FACTORY PARTS?
Designed around the vehicle manufacturer's original packaging requirements.
Premium used parts can cost substantially less than equivalent new components.
Keeping serviceable components in circulation reduces unnecessary disposal.
With over 25,000 parts physically held on our shelves, THEPARTPILOT specialises in giving quality automotive components another useful life.
PROFESSIONAL WORKSHOP SUPPORT
Insert your licensed HTTPS workshop photograph here
Our automotive operation combines dismantling, parts identification, stock management and repair experience, helping buyers source the correct component rather than relying on appearance alone.
WE BUY CARS FOR CASH
We Buy Cars for Cash with nationwide collection and same-day payment.
Please use the appropriate eBay contact facilities where applicable.
SHIPPING & WORLDWIDE DELIVERY
Postage is not free. Buyers pay the calculated shipping charge shown by eBay for their delivery destination.
International orders can be securely fulfilled through the eBay Global Shipping Programme (GSP) where available, providing access to destinations including the UK, Europe, USA, Australia, Canada and other supported territories.
SECURE PACKAGING
Insert licensed HTTPS photograph of securely boxed automotive components
Components are prepared for transport using appropriate protective packaging with the objective of reducing movement and transit damage.
VAT INFORMATION
Where this sale is supplied under the applicable VAT Margin Scheme for used goods, VAT is not separately charged or reclaimable on the invoice.
RETURNS & BUYER RESPONSIBILITY
Please verify the exact component before purchasing. Buyers are strongly urged to compare the listing's high-resolution photographs, mounting points and exact stamped/moulded part numbers rather than relying solely on automated vehicle compatibility dropdowns.
Consumer and eBay return rights remain unaffected. Where a returned item is received in the same condition, applicable eBay/consumer return rules will be followed.
Where permitted by eBay seller protections, a deduction may apply if a returned item has been used, altered, damaged, incompletely returned or otherwise suffered a demonstrable loss in value. Any deduction will reflect the actual loss in value and applicable eBay rules; no automatic restocking fee is charged.
HOW TO FIND US / CUSTOMER SUPPORT
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
♻️ BETTER FOR YOUR CAR. BETTER FOR THE PLANET.
Every high-grade automotive component successfully returned to service means one less usable part unnecessarily discarded. 🌍♻️ Choosing quality recycled vehicle parts helps reduce demand for replacement manufacturing, raw-material consumption, industrial energy use and associated greenhouse-gas emissions.
At the same time, you're supporting a growing UK automotive small business committed to keeping valuable components in circulation. 🚗🔧💚
Thank you for choosing THEPARTPILOT.