VW Golf Mk6 2008-2012 Rear Right Exterior Door Handle Blue 5 Door
VW Golf Mk6 2008-2012 Rear Right Exterior Door Handle Blue 5 Door
Volkswagen Golf Mk6 5K 2008–2012 Rear Right Exterior Door Handle – Blue Metallic – 5 Door
Corrected vehicle identification: the donor marking on the actual component reads “GOLF 2009”, the carrier displays the Volkswagen mark, and the handle shape is consistent with the Golf VI/Mk6 right-side exterior-handle family.
Actual Item Photographs
Correct Vehicle & Fitting Position Reference
Part Location — Rear Right Exterior Door
Reference vehicle photographs identify the Golf VI/Mk6 five-door body shape only. Colour, engine, trim and wheel design may differ. Images: Wikimedia Commons; front image by Spurzem under CC BY-SA 2.0 DE, rear image by M 93 released to the public domain.
Item Details & Specifics
| Vehicle Make | Volkswagen / VW |
|---|---|
| Primary Model | Golf VI / Golf Mk6 five-door hatchback |
| Factory / Chassis Code | Golf VI factory code 1K; commonly catalogued as 5K / 5K1 hatchback |
| Production Years | 2008–2012 Golf VI production period. UK registrations may appear later; do not use registration year alone. |
| Part Type | Exterior outer pull door handle with support/carrier components exactly as photographed |
| Placement | Rear right — UK offside rear / driver-side rear door |
| Body Style | Five-door hatchback only for this listed position |
| Colour Marking | Blue / blue-grey metallic appearance. Exact Volkswagen paint code is not visible; compare in daylight. |
| Material | Painted moulded polymer handle, engineering-plastic carrier, spring and metal fixing elements |
| Condition | Previously fitted recycled component. Age-related cosmetic marks may be present; the photographs form part of the condition description. |
| Included | The handle and attached carrier/support components visible in the actual-item photographs |
| Not Included | Door latch/actuator, interior handle, wiring, key barrel, door shell, trim panel or any component not shown |
| Likely Handle Cross-Reference | 1K8 837 206 E / 1K8837206E is commonly catalogued for visually matching Golf VI right-side exterior handles. This number is not clearly readable on the supplied item, so it must be treated as a matching reference rather than a confirmed stamped number. |
| Likely Carrier Cross-Reference | 1K0 837 886 / 1K0 837 886 A is commonly catalogued for the matching right-side support family. Confirm the exact suffix and carrier shape before ordering. |
| Interchange Part Number | No independently verified interchange number is visible on this exact item. |
| Superseded Part Number | No supersession is confirmed on this exact item. Catalogue references may list later suffixes, but VIN and physical-part matching take priority. |
| Keyless Entry | No electrical lead or capacitive sensor is visible. Do not order for a KESSY/keyless-entry sensor handle unless your removed part is physically identical. |
| Warranty | 30 days, subject to the eBay listing terms and applicable law |
| VAT | Sold under VAT margin/global accounting arrangements where applicable. VAT is not separately itemised and no reclaimable VAT invoice is available. |
Compatibility & Exclusion Table
| Vehicle | Years / Code | Body / Position | Status | Required Check |
|---|---|---|---|---|
| Volkswagen Golf VI / Mk6 | 2008–2012 production 1K / 5K / 5K1 |
5-door hatchback rear right outer handle |
PRIMARY FITMENT | Match carrier, end-retainer, locating pins, handle profile, colour and non-keyless configuration. |
| Volkswagen Golf VI registered in 2013 | Late registration | 5-door hatchback | CHECK FIRST | Confirm it is the earlier Golf VI/5K body, not Golf VII, and compare the removed handle. |
| Volkswagen Golf V / Mk5 | 2003–2008 1K1 |
3-door or 5-door | NOT CLAIMED | Some catalogue references overlap, but this listing is not sold as Mk5 fitment without an exact number and physical match. |
| Volkswagen Golf VII / Mk7 | From 2012 5G |
Any body | DOES NOT FIT | Different generation and handle system. |
| Volkswagen Golf VI 3-door | 2008–2012 | No rear side door | DOES NOT FIT | This part is listed for a rear door; a 3-door Golf has no rear side door. |
| Golf VI Variant / Estate | AJ5 | Rear right | NOT CONFIRMED | Do not assume hatchback compatibility; compare the exact number and carrier. |
| Golf Plus, Jetta, Scirocco, Touran, Tiguan | Various | Various | NOT COVERED | Platform sharing does not prove handle compatibility. Exact-number and visual matching are mandatory. |
| Golf VI with KESSY / keyless sensor handle | Any | Right side | NOT SUITABLE UNLESS IDENTICAL | Your removed handle must have the same sensor/wiring arrangement; none is visible here. |
| Left side or front door requiring a key barrel | Any | Wrong side / wrong position | DOES NOT FIT AS LISTED | Side and end-cap/lock-barrel arrangement must match exactly. |
What This Part Does & Where It Fits
The handle mounts through the outer skin of the rear-right door. Pulling the painted grip moves the carrier and release linkage, which then operates the door latch. The central-locking actuator, latch and interior release cable are separate components. Replacing the outer handle will only cure the fault when the handle, support, spring, retainer or connecting linkage is the cause.
Typical Handle Fault Symptoms
- Handle loose, cracked or detached
- Handle lifts but does not return
- Excessive free play before release
- Broken carrier tabs or spring seat
- Door opens internally but not externally
- Painted grip damaged or missing
Check for Other Faults First
- Latch or central-locking actuator jammed
- Release cable/linkage detached
- Child-lock issue
- Door alignment or striker fault
- Electrical locking fault
- KESSY sensor or wiring fault
Buyer Matching Checklist — Reduce Wrong Orders
- Confirm the car is a Golf VI / Mk6 five-door hatchback.
- Confirm the required position is rear right / offside rear / driver-side rear.
- Compare the circular end-retainer, spring, carrier ribs, locating pins and mounting points.
- Check whether your vehicle has a keyless-entry sensor or wiring in the handle.
- Compare the number on your removed handle with the catalogue references above.
- Check the blue/blue-grey metallic finish in natural daylight; exact paint code is not confirmed.
- Use eBay Messages for a VIN and photo check before ordering when any detail differs.
Fitting Instructions, Required Tools & Repair Time
Typical Tools
Plastic trim tools, Torx drivers/bits commonly including T20/T25/T30, small pick or hook, ratchet and sockets, masking tape, torch, magnetic tray and replacement trim clips if the door card must be removed.
General Fitting Sequence
- Park safely, switch off the ignition and open the rear-right door. Mask the paint around the handle.
- Place the replacement beside the original and compare every fixing, tab, spring, retainer and lever before dismantling.
- Remove the door-edge access bung near the handle and carefully loosen the retaining Torx screw. It may be captive; do not force or fully remove it unless the workshop procedure requires this.
- Hold the handle in the pulled position, release the end cap/retainer and unhook or slide the handle from the carrier.
- If the complete carrier is being changed, remove the rear door trim panel and peel back the moisture barrier carefully. Disconnect the release linkage without bending it.
- Install the matching carrier and handle in reverse order. Ensure the carrier is seated and the grip returns freely.
- With the door still open, test the outer handle, inner handle, central locking and child lock repeatedly.
- Refit the moisture barrier, trim and access bung. Do not slam the door until correct release and locking operation are confirmed.
Static Garage Labour Cost Calculator
Formula: hourly labour rate × estimated repair time. The guide below covers 0.75–1.50 hours and excludes the part, diagnosis, consumables, paintwork and any additional seized or broken components.
| Garage Rate | 0.75 Hour | 1.00 Hour | 1.50 Hours |
|---|---|---|---|
| £50/hour | £37.50 | £50.00 | £75.00 |
| £75/hour | £56.25 | £75.00 | £112.50 |
| £100/hour | £75.00 | £100.00 | £150.00 |
| £125/hour | £93.75 | £125.00 | £187.50 |
Factory-Specification Recycled Part Benefits
A correctly matched manufacturer-produced component preserves the vehicle’s intended mounting geometry, pull travel, spring action and exterior profile. Low-cost copies can vary in moulding accuracy, plastic strength, clip position and paint quality. A carefully matched recycled component can offer a stronger physical match while costing substantially less than a new dealer-supplied assembly.
Delivery, Checkout Address & International Orders
- The delivery service and charge shown in the eBay order apply; this description does not promise free postage.
- International delivery may be available through eBay’s international shipping services for eligible destinations displayed at checkout.
- Destination availability, import charges and delivery terms are controlled by eBay and can vary by item and buyer location.
- Check the checkout address before payment. We cannot redirect an order to a different address after purchase.
- Orders must be sent to the address approved within the eBay transaction, not an address supplied only by message.
Returns & Installation Protection
Returns are handled under the return policy displayed on the eBay listing and applicable consumer law. To minimise wrong orders, compare all actual-item photographs, the position, body style, handle number and carrier before installation.
UK Stock, Workshop Knowledge & Sustainable Reuse
THE PART PILOT holds more than 25,000 vehicle parts across its stock range. Components are identified from the donor vehicle, photographed, stored and packed for dispatch from UK stock. Reusing serviceable parts keeps valuable components in circulation and can reduce demand for new raw materials and manufacturing energy.
🔧 Practical Support
Fitment guidance through eBay Messages and workshop fitting subject to availability.
📦 Dispatch Care
Protective packing selected for the component type and delivery service shown in the order.
♻️ Support Reuse
Your purchase supports an independent UK business while keeping a serviceable vehicle part in circulation.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.