VW Golf Plus 5M 2005-2014 Rear Left Bumper Support Guide Bracket 5M0807393A

VW Golf Plus 5M 2005-2014 Rear Left Bumper Support Guide Bracket 5M0807393A

£23.81
Skip to product information
VW Golf Plus 5M 2005-2014 Rear Left Bumper Support Guide Bracket 5M0807393A

VW Golf Plus 5M 2005-2014 Rear Left Bumper Support Guide Bracket 5M0807393A

£23.81
THEPARTPILOT

VW Golf Plus 5M / 52 Rear Left Bumper Support Guide Bracket

Part number 5M0807393A / 5M0 807 393 A | Catalogue application 2005-2014 | Rear Left
Part-number verified Exact item photos VIN check recommended Used original factory part

Buy The Correct Part First Time

This is the rear-left bumper guide / support bracket for Volkswagen Golf Plus applications listed below. The photographed moulding carries part number 5M0 807 393 A, also written 5M0807393A.

Fitment rule: do not order from registration year, engine size or the eBay compatibility widget alone. Match the stamped number on your existing part and, if there is any doubt, send the full 17-character VIN plus a clear photo of your existing bracket through eBay Messages before purchase.
Vehicle family
Volkswagen Golf Plus
Platform / chassis
5M1, 521 / Golf Plus 5M and later 52 catalogue grouping
Model years
2005-2014 catalogue application, subject to VIN confirmation
Position
Rear Left - physical left side of the vehicle when seated in the car facing forward
UK orientation
Rear Left is normally the UK nearside / passenger side on a right-hand-drive car
Function
Locates, supports and retains the left edge/corner of the rear bumper cover against the body
Electrical function
None. This is a mechanical bumper guide; it does not control parking sensors, lamps or another electronic system.
Material
Moulded engineering plastic; inspect the exact item photo for the moulded material identification marks if specification is critical.
Country marking
Germany marking is visible on the photographed part.
Condition
Used. Inspect all exact item images carefully for cosmetic marks, tabs, mounting points and included components.
THEPARTPILOT  THEPARTPILOT  THEPARTPILOT

Exact Part Identification Photos

These images are served from eBay's own image CDN and show the actual listing part. Use the moulded number and shape as your primary visual cross-check.

Reference Vehicle - Correct Golf Plus 5-Door Body Family

Reference images only: the cars below are not the donor vehicle and are not included in the sale. They are included only to help identify the Golf Plus body family. Always confirm the part using VIN and the stamped bracket number.

The rear-left bracket sits behind the bumper cover at the left rear corner, around the bumper-to-quarter-panel / wheel-arch junction. It guides the bumper edge into its correct position and helps maintain an even panel gap.

Verified Compatibility Table

Make Model Catalogue group Years Body Status Buyer check
Volkswagen Golf Plus 5M 2005-2007 5-door CATALOGUED VIN + current part number
Volkswagen Golf Plus 5M 2008-2009 5-door CATALOGUED VIN + current part number
Volkswagen Golf Plus 52 2009-2011 5-door CATALOGUED VIN + current part number
Volkswagen Golf Plus 52 2012-2014 5-door CATALOGUED VIN + current part number

The 2009 overlap reflects catalogue generation/changeover grouping. A registration year alone cannot resolve every build-date or production-change question; use VIN verification.

Other vehicle applications

We did not find sufficient part-number evidence to add another vehicle model with confidence. This listing therefore stays limited to the Volkswagen Golf Plus application above rather than guessing cross-model fitment.

Do Not Order For These Without A VIN Check

Vehicle / position Status Reason
Golf Plus - Rear Right NOT THIS PART The corresponding right-side bracket is identified separately as 5M0807394A.
Standard Golf Mk5 / Mk6 hatchback NOT CONFIRMED No reliable 5M0807393A application found in the sources reviewed.
Golf Estate / Variant NOT CONFIRMED Different rear body/bumper application; do not assume interchangeability.
Golf Sportsvan NOT CONFIRMED Later separate model; do not infer fit from the Golf name.
Touran NOT CONFIRMED No reliable cross-model evidence found for this part number.
CrossGolf / Cross Golf VIN CHECK Do not assume the body-cladding/bumper variant uses this guide without VIN confirmation.
Any vehicle with a different stamped bracket number STOP AND CHECK Send VIN and a clear image of the old part through eBay Messages before ordering.

Part Numbers And Cross-References

Primary stamped number
5M0 807 393 A
Compact format
5M0807393A
Catalogue replacement / supersession shown by parts catalogues
5M0 807 375 / 5M0807375
Do not treat a supersession as automatic vehicle-level proof - confirm by VIN.
Opposite side - not included
5M0 807 394 A / 5M0807394A

What This Bracket Does

The bracket is a rear bumper side guide/support. It mounts behind the rear bumper cover on the left side and provides the locating track/support that the bumper edge engages with. Correct location helps the bumper sit flush against the rear quarter area and remain securely retained.

Common Symptoms Of A Damaged Or Worn Guide

Rear bumper corner sits proud of the body or repeatedly pops out.
Uneven gap between bumper cover and rear quarter panel.
Bumper edge sags, moves excessively or feels loose by the wheel arch.
Rattle / movement after minor impact, bumper removal or previous repair.
Broken guide rails, clips, tabs or mounting points visible on inspection.
Difficulty aligning the bumper correctly during refitting.

Why Choose An Original Factory Volkswagen Part?

A used original factory bracket gives you the original moulding geometry, guide shape, mounting-hole positions and bumper engagement points for the application it was designed for. Cheap copy parts can vary in moulding accuracy, material stiffness and clip location, which may create poor panel gaps or make a bumper difficult to secure.

Buying a serviceable used original factory part can also cost substantially less than buying a new replacement. Depending on the component and current new retail price, used parts can save as much as 70%; this is a potential saving, not a guaranteed percentage on every item.
THEPARTPILOT  THEPARTPILOT  THEPARTPILOT

Fitting Guide

Important: this is practical guidance, not a manufacturer workshop procedure or fixed labour time. Fasteners and access can differ by build date, trim, parking sensors, towbar equipment and previous repairs. If you are not confident removing/refitting a bumper safely, use a competent repairer.

Typical Tools

  • Torx T20 / T25 / T30 drivers or bits
  • 10 mm socket/spanner
  • Ratchet and extension
  • Plastic trim-removal tool
  • Clip-removal tool
  • Small screwdriver or pick
  • Masking tape / paint protection
  • Gloves and inspection lamp

Typical Procedure

  1. Before dismantling, verify the VIN, side and stamped number. Compare the replacement bracket shape with the existing bracket.
  2. Park securely on level ground, switch the ignition off and protect painted bumper/quarter-panel edges with suitable tape or covers.
  3. Open the tailgate and gain access to the rear lamp / bumper fixings as required by the vehicle build.
  4. Remove the relevant wheel-arch, lower-edge and lamp-aperture bumper fasteners. Keep fixings organised for refitting.
  5. Support the bumper cover. If fitted, disconnect any parking-sensor or lighting wiring only after identifying the connectors and their routing.
  6. Release the bumper edge carefully from the side guide and move the cover far enough to access the damaged rear-left guide bracket.
  7. Remove the damaged bracket, inspect the body mounting points and compare the old and replacement parts before installation.
  8. Fit the replacement guide using the correct serviceable fixings. Do not force misaligned fasteners or damaged tabs.
  9. Re-engage the bumper cover with the guide, reconnect wiring, refit all fasteners and check that the bumper-to-body gap is even and secure.
  10. Check rear lamps and parking sensors where fitted before returning the vehicle to service.

Garage Labour Cost Guide

For planning only, allow roughly 0.5 to 1.0 hour for a straightforward bracket replacement where bumper fasteners are serviceable and there is no body damage. This is not a Volkswagen book time. Seized fixings, broken clips, towbar equipment, parking-sensor wiring or accident damage can increase labour.

Simple calculation: garage hourly rate x estimated hours = estimated labour charge.

Garage rate 0.5 hour 0.75 hour 1.0 hour
£50/hour £25.00 £37.50 £50.00
£60/hour £30.00 £45.00 £60.00
£70/hour £35.00 £52.50 £70.00
£80/hour £40.00 £60.00 £80.00
£90/hour £45.00 £67.50 £90.00
£100/hour £50.00 £75.00 £100.00
£120/hour £60.00 £90.00 £120.00

Garage charges vary. Estimates exclude additional parts, broken fixings, diagnostics, body repair, consumables and any taxes applicable to the repair service.

Fitting / repair service: fitting for this part may be available subject to workshop capacity, vehicle condition and appointment. Please contact us through eBay Messages before purchasing or travelling.

ThePartPilot Stock, Collection And Dispatch

📦25,000+ parts
Stock held on shelf at any one time
🔧Fitting available
Subject to workshop availability
🚚International delivery
Eligible destinations shown at checkout
Reuse first
Give serviceable parts another working life

WhatsApp QR for Fitment Help / Appointment Enquiries

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.

style="width:240px;height:240px;max-width:100%;display:inline-block;border:0;"

For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.

Dispatch

Parts are checked against the listing before dispatch and packed for transport. Please inspect the exact item photographs before buying and retain all packaging until you have checked the part.

Checkout Address

Please check your delivery address before paying. We dispatch to the address supplied on the eBay order and cannot manually change the checkout address after purchase. If the address is incorrect, the order may need to be cancelled and placed again with the correct details.

International Delivery - eBay Global Shipping Programme

International delivery may be available through eBay's Global Shipping Programme when the item, destination and order meet eBay eligibility rules. The final available destinations, import charges and delivery options are determined by eBay at checkout.

EU destinations currently listed by eBay

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Non-EU destinations currently listed by eBay

Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.

Programme countries and eligibility can change. The eBay checkout screen is the final authority for this specific item and buyer destination. Import VAT, duties or other destination charges may be collected separately where applicable.

VAT And Invoice Information

Where this second-hand part is sold under the Global Accounting VAT Margin Scheme, VAT is accounted for within the scheme and is not shown separately on the sales invoice. There is no separately stated VAT amount for the buyer to reclaim on that scheme sale.

Returns And Fitment Protection

We provide the part number, side, model family, catalogue year range, comparison photos and a fitment table to reduce wrong orders. If you are unsure, please ask us through eBay Messages before buying and provide the full VIN plus a clear photo / number from the part currently fitted to your vehicle.

Returns: returns are handled under the return policy shown on the eBay listing and your applicable statutory rights. There is no automatic restocking charge. Where eBay rules permit a deduction because a returned item has been used, altered, damaged, is incomplete or is returned in materially different condition, any permitted deduction should reflect the actual loss in value and eBay's applicable seller-protection rules.

To help avoid fitment disputes, do not modify, drill, cut, paint or force-fit the part until you have completed your comparison and are satisfied it is correct.

Supporting A Local Parts Business And Reusing Good Components

♻ 🔧 📦 Buying a serviceable used part supports a specialist local parts business while keeping a usable component in circulation. Reusing suitable vehicle parts can extend the working life of components and reduce unnecessary demand for newly manufactured replacements. Thank you for choosing ThePartPilot and for checking fitment carefully before ordering.

You may also like