VW Jetta Mk5 1K2 2006-2010 Battery Tray Box Holder Mount 1K0 915 333 C

VW Jetta Mk5 1K2 2006-2010 Battery Tray Box Holder Mount 1K0 915 333 C

£20.33
Skip to product information
VW Jetta Mk5 1K2 2006-2010 Battery Tray Box Holder Mount 1K0 915 333 C

VW Jetta Mk5 1K2 2006-2010 Battery Tray Box Holder Mount 1K0 915 333 C

£20.33
THEPARTPILOT
VOLKSWAGEN JETTA Mk5 1K2
BATTERY TRAY / BATTERY BOX HOLDER / CARRIER
ORIGINAL VOLKSWAGEN FACTORY PART • USED PART • FITMENT-FIRST LISTING
IMPORTANT — VERIFY BEFORE ORDERING
This part must not be purchased from registration, model name or appearance alone. Battery tray designs can vary by engine, battery specification and vehicle configuration. For the lowest possible risk of an incorrect order, compare the part number moulded/stamped on your existing tray or send your full 17-character VIN through eBay Messages before ordering.
PART NUMBER CHECK
Current eBay listing states 1K091533C
Volkswagen catalogue format to check 1K0 915 333 C / 1K0915333C
Later catalogue revision 1K0 915 333 H
Identification status Physical moulded number is not readable in the current listing photographs — confirm before relying on the reference above.
ACTUAL ITEM PHOTOGRAPHS
Actual Volkswagen Jetta battery tray for sale
Actual underside and mounting points of battery tray

These photographs show the actual used component. Please compare the moulding, mounting points, tabs, fixing locations and overall shape with the part removed from your vehicle.

VEHICLE REFERENCE — JETTA V / Mk5 SALOON
2006 to 2007 Volkswagen Jetta V four door saloon reference vehicle

REFERENCE VEHICLE ONLY: Volkswagen Jetta V / Mk5 four-door saloon. The vehicle pictured is not included and the image is not being used as proof that every engine specification uses the same tray.

WHERE IS THE BATTERY TRAY FITTED?
Volkswagen Jetta V engine bay reference showing battery area

The battery tray is installed in the engine compartment directly beneath the vehicle's main 12-volt battery. The battery sits on the tray and is retained by the vehicle's battery securing system. Surrounding air-box, fuse-box and intake layouts vary by engine.

The engine-bay photograph is a Jetta V location reference only and must not be used as engine-code or part-number fitment evidence.

WHAT THIS PART DOES

The battery tray forms the rigid lower mounting platform for the vehicle battery. It positions the battery correctly in the engine bay and provides mounting points for the battery retention and surrounding battery-box components.

This is a structural support component rather than an electronic control unit. It does not electronically control the charging or starting system; its job is to locate, support and help secure the battery assembly correctly.

CONSTRUCTION & CONDITION

Used original manufacturer component. The photographs show a black moulded polymer/composite tray with reinforcing ribs, mounting bosses and metal fixing/insertion points. Exact polymer formulation is not stated because it cannot be reliably determined from photographs alone. Expect normal cosmetic marks consistent with a used engine-bay component.

CURRENT LISTED VEHICLE APPLICATIONS

The existing eBay compatibility data currently lists the following Jetta III / Mk5 1K2 saloon applications. These rows are reproduced as a purchasing aid but should still be confirmed by VIN or matching physical part number.

Year Model / Chassis Engine Power Status
2006 Jetta III / Mk5 1K2 Saloon 2.0 TDI BMN / CEGA 170 HP Listed — VIN check advised
2006 Jetta III / Mk5 1K2 Saloon 1.4 TSI BMY 140 HP Listed — VIN check advised
2006 Jetta III / Mk5 1K2 Saloon 1.4 TSI BLG 170 HP Listed — VIN check advised
2006 Jetta III / Mk5 1K2 Saloon 2.5 BTK 150 HP Listed — VIN check advised
2007 Jetta III / Mk5 1K2 Saloon BMN/CEGA, BMY, BLG or BTK as above Application dependent Listed — VIN check advised
2008 Jetta III / Mk5 1K2 Saloon BMN/CEGA, BMY, BLG or BTK as above Application dependent Listed — VIN check advised
2009 Jetta III / Mk5 1K2 Saloon BMN/CEGA, BMY, BLG or BTK as above Application dependent Listed — VIN check advised
2010 Jetta III / Mk5 1K2 Saloon BMN/CEGA, BMY, BLG or BTK as above Application dependent Listed — VIN check advised
DO NOT ASSUME FITMENT TO THESE VEHICLES

Fitment has NOT been confirmed for Jetta engines or specifications outside the applications listed above. This includes other 1.6, 1.9 TDI, 2.0 petrol/diesel and market-specific configurations unless VIN or physical part-number verification confirms the application.

Do not assume this exact revision fits Golf, Golf Plus, Touran, Caddy, Audi A3, SEAT Leon, SEAT Altea, Skoda Octavia, Passat or other Volkswagen Group vehicles simply because a visually similar battery tray exists. Shared platforms do not by themselves prove that the same revision is correct.

If your vehicle is not explicitly covered above, contact us through eBay Messages with the full VIN before purchase.

THEPARTPILOT FITMENT CHECK

Our goal is to help you order the correct part first time and reduce unnecessary returns. Before ordering, check:

1. Full 17-character VIN
2. Existing part number
3. Engine code
4. Vehicle year and body type
5. Mounting points and physical shape against the actual item photographs

POSSIBLE SIGNS OF A DAMAGED BATTERY TRAY

A cracked, broken or incorrectly fitted battery tray may result in excessive battery movement, loose or damaged mounting points, rattling from the battery area, poor alignment of the battery cover or enclosure, difficulty securing the battery clamp, or visible fractures around the tray's fixing points.

Battery movement should not be ignored because a correctly retained battery helps prevent unnecessary load on terminals, cables and surrounding engine-bay components.

WHY CHOOSE AN ORIGINAL FACTORY PART?

An original Volkswagen factory component was manufactured around the vehicle's production mounting geometry and installation requirements. Correct locating points, reinforced sections and fastener positions are particularly important on a battery carrier.

A low-cost reproduction may appear similar in a photograph while differing in material thickness, fixing geometry or small moulded details. Choosing a matching used original component can reduce the risk associated with an unverified reproduction.

Used parts can also offer substantial savings compared with purchasing a new replacement component. Actual savings vary according to the part, vehicle and current new-retail pricing.

GENERAL FITTING GUIDE

This is a general workshop overview only. Exact access, fasteners and battery procedures vary by engine and specification.

Step 1: Park securely, switch the ignition off and remove the key.
Step 2: Follow the correct battery-disconnection procedure for the vehicle.
Step 3: Disconnect the negative battery terminal first, followed by the positive terminal.
Step 4: Remove the battery hold-down/clamp and carefully lift the battery out of the engine compartment.
Step 5: Remove the battery surround, cover, ducting or nearby components required for access.
Step 6: Remove the battery tray retaining fasteners and release any attached clips or cable supports.
Step 7: Compare the removed tray directly with the replacement before installation.
Step 8: Install the replacement tray and secure all original fixing locations correctly.
Step 9: Reinstall surrounding components and battery retention hardware.
Step 10: Reconnect the positive battery terminal followed by the negative terminal and verify the battery is firmly secured.

TYPICAL TOOLS REQUIRED

Socket and ratchet set • 10 mm socket/spanner for common battery terminal arrangements • 13 mm socket commonly used for battery retention hardware • extensions • Torx/driver set • trim tool • insulated gloves • suitable battery lifting handle where required.

Fastener sizes can vary by engine and previous repairs, so inspect the vehicle before starting.

ESTIMATED WORKSHOP TIME

Typical planning allowance: approximately 0.5 to 1.0 labour hour.

Actual time can vary with engine layout, air-box removal, access, corrosion, seized hardware, battery condition and any previous vehicle modifications.

GARAGE LABOUR COST ESTIMATOR

Estimated labour cost = garage hourly rate × labour time. Parts, diagnostics, VAT charged by the repairer and additional work are not included.

Garage Rate 0.5 Hour 0.75 Hour 1.0 Hour
£50/hour £25.00 £37.50 £50.00
£60/hour £30.00 £45.00 £60.00
£70/hour £35.00 £52.50 £70.00
£80/hour £40.00 £60.00 £80.00
£90/hour £45.00 £67.50 £90.00
£100/hour £50.00 £75.00 £100.00
FITTING SERVICE AVAILABLE

Fitting and repair services may be available subject to workshop capacity and vehicle requirements. Contact us through eBay Messages before travelling or purchasing if you would like to discuss fitting.

COLLECTION AVAILABLE BY APPOINTMENT

Collections can be arranged 7 days a week up to 8pm by prior appointment, including bank holidays by prior arrangement.

Please contact us through eBay Messages to arrange collection before travelling. Seller contact and business location information is available through the eBay seller profile.

UK & INTERNATIONAL DELIVERY

International delivery is available through eBay's Global Shipping Programme where the item and destination qualify. International postage, import charges and delivery options are calculated by eBay at checkout.

Current GSP eligible markets include: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.

Destination availability is controlled by eBay and may depend on item eligibility, export rules, dimensions and current programme restrictions.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

CHECK YOUR DELIVERY ADDRESS BEFORE PAYMENT

Please ensure the delivery address shown at eBay checkout is complete and correct before completing payment. Orders can only be dispatched using the address supplied with the eBay transaction and we cannot manually substitute another delivery address after checkout.

VAT / GLOBAL ACCOUNTING

Where applicable, this second-hand part is sold under the Global Accounting VAT Margin Scheme. VAT is accounted for under the applicable scheme and is not shown separately on the sales invoice.

RETURNS & FITMENT RESPONSIBILITY

Please use the photographs, part number, vehicle details and VIN verification service before ordering. Do not install or modify the part merely to test whether it fits if you intend to return it.

Returns and refunds are handled in accordance with the return terms shown on the eBay listing and applicable eBay policies. Where eBay permits a deduction for demonstrable loss in value caused by use, damage, missing components or inadequate return packaging, any deduction will be assessed under eBay's rules.

If you are unsure about fitment, please ask us to verify the VIN before ordering.

25,000+ PARTS IN STOCK

ThePartPilot holds more than 25,000 vehicle parts on the shelf at any one time, helping us supply quality used components efficiently.

CHECKED
Item-specific photographs and fitment information.
PACKED
Parts prepared carefully for dispatch.
SUPPORTED
VIN fitment assistance available through eBay Messages.
SUPPORT REUSE & A LOCAL SMALL BUSINESS

Choosing a serviceable used vehicle component keeps useful parts in circulation rather than discarding them prematurely. Reuse can reduce unnecessary waste while giving customers a cost-effective route to keeping existing vehicles on the road.

Every purchase also supports an independent UK automotive parts business focused on accurate identification, careful dispatch and helping customers buy the right part first time.

THEPARTPILOT
PARTS • FITMENT • SUPPORT
THEPARTPILOT • THEPARTPILOT • THEPARTPILOT

You may also like